Javascript Menu by Deluxe-Menu.com

CO2 Release Systems

 

CO2 Release Systems

If your grow room gets hot, or the air is stagnant, or you're concerned about a lack of CO2, then air exchange can resolve the above. By simple extraction you not only keep to the temperatures that the plants love to thrive in, but you achieve better air circulation of stale air exhausted of usable CO2. Depending on grow rooms some people extract hot stale air out as well as drawing fresh air in. For complete air exchange however, a sealed grow room using a single extractor can cause a positive pressure, pulling air in from an available inlet. It really is a case of suck it and see. We do offer a complete upgrade service, so if you find you bought a fan from us that is too small for your needs, we will part exchange at full price against the price of a bigger one. This applies to all new equipment. The filters we offer clean the exhausted air of any unwanted odours that your plants might be producing, and they also act as great silencers.

Carbon dioxide (CO2) is essential for plant growth. In an enclosed growing area, as plants use up available CO2, their growth will slow down and may eventually stop. Replenishing CO2 will not only maintain growth but dramatically increase it. The average level of CO2 in the atmosphere is about 350 PPM [parts per million]. Through years of agreed upon practice, the optimum level is in the 1000-1500 PPM range. At these levels it is not uncommon to realise a 25-40% increase in yield. In the absence of CO2-enrichment equipment, the common way of replenishing CO2 content in an enclosed growing area is by an extractor fan. This draws in fresh air and with it ambient levels of CO2.

 
Hydroponic Systems
 
Grow Lights & Accesories
 
Nutrients & Additives
 
Fans & Filters
 
Grow Media (Soil & Pebbles etc)
 
CO2 Release Systems
 
Environmental Controls
 
Bugs / Pest / Disease Control
 
Miscellaneous & Grow Tents
 
Books / Seeds
 
Starter Kits (Hydoponic / Soil)
 
Closed Environment Agriculture
 
Ordering / FAQ



[ Request a Catalogue & CD ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

SuperPro CO2 PPM Controller - CARBON-B1

The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained.

A built-in photocell automatically activates the unit only during the DAY. The user can also select their desired “Dead-band” setting depending on how accurately they want to control their PPM level. A pair of LEDs on the front face of the unit allows the user to quickly verify the ACTUALCO2 level +/- 50 PPM simply by counting the number of times the lights flash on and off. The “plug-box” unit is plugged into a standard power outlet, then the user connects any CO2 regulator or CO2 generator to the CARBON-B1. Once powered up and connected, the CARBON-B1 will automatically keep the CO2 at the preset level. The unit can also be easily re-calibrated by the user to ensure proper operation. Unit rated at 10 amps @ 240vac 50/60hz.


SuperPro CO2 PPM Controller - CARBON-B1 £336
Make an Offer
 
   
SuperPro CO2 PPM Controller - CARBON-B1

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

DDAC-1 Superpro Deluxe Digital Atmosphere / CO2 Controller

The DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.

A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed components.

The DDAC-1 features a remote sensor assembly that measures temperature, humidity, CO2 PPM, and light all in a small water-resistant enclosure that can be located up to 15 ft from the main controller enclosure. DDAC-1’s main controller enclosure features FOUR separate power outlets used to connect external devices such as fans, CO2 generators, heaters and dehumidifiers. Each external device easily connects to the unit creating a simple and user friendly “plug & play” set up.

DDAC-1 features simple-to-understand pushbutton settings and a bright green LED display. DDAC-1 may look complicated to the novice grower, but do not be intimidated it is VERY easy to use.

Each unit comes pre-programmed with recommended settings; however DDAC-1 is extremely flexible and capable of customization to accommodate a wide range of growing environments.

DDAC-1 is capable of expansion in order to control higher quantities or larger devices simply by adding “Power-Multiplier Modules” which will be available soon.

DDAC-1 can be all a grower needs to effectively monitor and control an indoor growing environment, even from a remote location.

The “Remote Monitoring Software” allows the user to monitor and alter growing conditions remotely from a PC or laptop. This software can also datalog or chart a grow room’s environmental conditions.
 
   
Superpro Deluxe Digital Atmosphere / CO2 Controller

Superpro Deluxe Digital Atmosphere / CO2
Controller
£750
Make an Offer
 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

BZ25 CO2 Air Quality Monitoring Device

  • Sensor: NDIR sensor (non-dispersive infrared)
  • Measuring range: 0 to 9,999 ppm CO2
  • Resolution (accuracy): 1 ppm (±75 ppm or ±5 % of the measuring value)
  • Measuring range: -5 °C to +50 °C (32 °F to 120 °F)
  • Resolution (accuracy): 0.1 °C (±0,5 °C)
  • Relative humidity
  • Measuring range: 0.1 % RH to 99.9 % RH
  • Resolution (accuracy): 0.1 % RH (max. ±3 % RH)
  • Measuring interval: 2 seconds
  • Functions: Real-time display, minimum and maximum value for CO2, temperature and relative humidity; time and date, CO2 indicator; CO2 alarm function; temperature display in °C and °F; backlit display
  • Power supply: 230 V mains adapter
  • Dimensions / Weight: 110 x 105 x 61 mm / 74 g
  • Scope of delivery: Measuring device, mains adapter, operating instructions
BZ25 CO2 Air Quality Monitoring Device £155
Make an Offer
 
   
BZ25 CO2 Air Quality Monitoring Device

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

BZ30 CO2 Air Quality Data Logger

  • CO2-Sensor: NDIR sensor (non-dispersive infrared)
  • Carbon dioxide measuring range: 0 to 9,999 ppm CO2
  • Carbon dioxide resolution (accuracy): 1 ppm (±75 ppm or ±5 % of the measuring value)
  • Temperature measuring range: -5 °C to +50 °C
  • Temperature resolution (accuracy): 0.1 °C (±0.5 °C)
  • Relative humidity measuring range: 0.1 % RH to 99.9 % RH
  • Relative humidity resolution (accuracy): 0.1 % RH (max. ±3 % RH)
  • Measuring interval: 2 seconds
  • Memory: 50,000 measuring values
  • Functions: Real-time display, minimum and maximum value for CO2, temperature and relative humidity; time and date, CO2 indicator; CO2 alarm function; temperature display in °C and °F; backlit display
  • Additional functions: Adjustable measuring cycle from 1 second to 12 hours, non-stop or ring logging
  • Power supply: 230 V main adapter NiMH battery or 230 V mains adapter
  • PC interface: USB, PC analysis software
  • Dimensions / Weight: 110 x 105 x 61 mm / 74 g
  • Scope of delivery: Measuring device, mains adapter, operating instructions, NiMH battery
BZ30 CO2 Air Quality Data Logger £185
Make an Offer
 
   
BZ30 CO2 Air Quality Data Logger
 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

Superpro Electronic Ignition CO2 Generators

Finally available in the UK, A safe and reliable CO2 generator, featuring Electronic ignition, eliminating the need for wasteful and potentially problematic open pilot lights. Available in 3 different size's for small, medium and larger applications. Perfect for sealed rooms, each unit consists of several innovative and useful safety features, for both personal safety as well as efficient operation and maintaining the safety and performance of your plants. For example, if the burners do not fire the first attempt, it will try again. After a 30 second pause the unit will attempt to re-fire the burners for 15 seconds, This cycle will repeat until it fires for a maximum of 5 times. After 5 unsuccessful attempts, the module will lock itself for a 20 minute pause, and then try again.

Another safety feature is if the unit is knocked or tilted by 30 degrees it will shut itself down until the problem has been rectified. These are very nice co2 generators indeed.

In closed room applications we recommend the following units for the following sized rooms:

Superpro Gen 2 – 10ft x 10ft or less
Superpro Gen 4 – 15ft x 15ft or less
Superpro Gen 8 – 25ft x 25ft or less

Advanced "2-stage" electronic ignition module eliminates open pilot flames and ensures proper operation.

[ more info ]

 
   
Superpro Electronic Ignition CO2 Generators

Superpro Gen 2 £385
Superpro Gen 4 £445
Superpro Gen 8 £500
Make an Offer

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Boost Bucket

These all natural CO2 generators are a great alternative to the usual methods of distributing CO2 in your grow space. Unlike other methods of CO2 generation the boost bucket requires nothing but a socket and in some cases a fan to operate. Other methods of CO2 generation are known to be dangerous or cumbersome often requiring heavy tanks or open flame.

The CO2 Boost Bucket has a life span of around 60 days if used continuously, if placed on a timer the bucket can last around three months. The bucket gives off around 1000-2000ppm CO2, however the output is not meant to be read in parts per million, by suspending your hose above your plants the CO2 will be absorbed very quickly and the effect is clearly visible in your plants.

This boost bucket comes with a pump which you insert into the bucket to start releasing carbon dioxide, once the seal is broken the life span of your bucket begins. It is advised that once you have broken the seal you replace your bucket after 90 days as the production rate of CO2 will lessen and eventually stop.


CO2 Boost Bucket £135
CO2 Boost Bucket Refill (no pump) £99
Make an Offer
 
   
CO2 Boost Bucket

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

ExHale CO2 Bag

The CO2 revolution for all growers! No need to turn it on or turn it off, simply place the ExHale CO2 bag in your grow space and leave it alone to do its job. A continuous shower of CO2 directly onto your plants is the most efficient way to deliver CO2.

Placing the ExHale Cultivator slightly above the level of your plants will insure they receive the CO2 they need 24 hours a day for up to 6 months. ExHale®-Homegrown CO2 is a revolution in indoor CO2 production systems.

  • 1 Bag for up to 16 square feet
  • Cost effective CO2 for tents or rooms
  • The CO2 Revolution!

ExHale CO2 Bag £45
 
   
ExHale CO2 Bag

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Tabs

With Co2 Tabs you can offer the carbon dioxide directly to your plants and significantly increase the speed of growth. Only healthy plants will be able to effectively use this extra input. During extensive testing we perceived as the possible side affect a shortage of magnesium due to the high speed of growth. To effectively prevent this we have added 1.2% magnesium sulfate.

The tabs release the Co2 in the water and thus stimulate the growth. Healthy plants can absorb many times more of this important nutrient, Co2, as is available in the air. Adding Co2 short before the dark period doesn't give any results, as the plant doesn't absorb Co2 in the dark! The tabs bond the Co2 about 4 to 6 hours to the offered water.


CO2 Tabs £10
 
   
CO2 Tabs

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

Coolgen SX2 - Growth Gas CO2 Generator

The COOLGEN SX2 propane/LPG CO2 generator " is the latest piece of technology available for supplementing CO2 to plants. The COOLGEN is loaded with safety features and a powerful 16KW flame that produces up to 3.6 KG of cool CO2 per hour. Compared to a standard CO2 generator the SX2 runs more than 700% cooler. This is possible because of a specially designed heat exchanger mounted over the flame. This feature allows 86% of the heat produced from burning LPG to be removed from the growing environment; allowing the gardener to maintain optimum levels of CO2 with no heat issues at all.

Produces less heat than a standard 2.5KW generator & over 6 times the amount of CO2.

Can be operated in smaller growing areas- 2SQM up to 30SQM

Perfect for use in hydroponic gardens/greenhouses where fast growth and productive harvests are required.


Coolgen SX2 £605
Make an Offer
 
   
Coolgen SX2 - Growth Gas CO2 Generator

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

GI CO2 Monitor / Controller / Sensor

The GI professional CO2 monitor/controller combines the very latest technology with plug and play operation. We have added a photosensor to detect light and dark, this automaticaly changes the working mode of the controller. Other features include: fully adjustable between 0-2000ppm, wall mountable, extremely accurate external sensor with 3 meter cable & automatic calibration.

The GI controller can be used with CO2 generators, CO2 injection devices, solenoid valves & pumps.

For use with Coolgen, the controller would be either pluged directly into a water pump or a water solenoid valve.

[ more info ]


GI CO2 Monitor / Controller / Sensor £583
Solenoid Valve Kit for above £132
Make an Offer
 
   
GI CO2 Monitor / Controller / Sensor

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

Coolgen - Pump & Filter for Long Distance Reservoir

Water Pump & filter for use with coolgen when operating a long distance reservoir (10-40 meters).

Features:

  - High pressure(3.5Bar).
  - Pump,suction hose and filter.
  - 3500LPH(litres per hour).
  - Max pressure: 3.5 bar.
  - Max recommended hose length: 40m
  - Self-priming
  - Course and fine filters
  - Spare seal set included
  - 2 year guarantee


Coolgen - Pump & Filter £143
 
   
Coolgen - Pump & Filter for Long Distance Reservoir
Make an Offer
 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

Coolgen - Standard Pump & Internal Filter

Water Pump & filter for use with coolgen when operating a short distance reservoir (up to 10 meters).

Features:

  - High pressure(1.1Bar).
  - Internal filter.
  - Max pressure: 1.1 bar.
  - Max recommended hose length: 10m
  - Self-priming.
  - 2 year guarantee


Coolgen - Standard Pump & Filter £109
 
   
Coolgen - Standard Pump & Internal Filter

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Analysis Kit

The handy bits and pieces that you will need to get if you are going to use CO2 in your grow room. The CO2 Test Kit is an essential part of any growth gas environment, allowing you to precisely check the levels of CO2 in your grow room.

The CO2 Test Kit is an essential part of any growth gas environment, allowing you to precisely check the levels of CO2 in your grow room. Spare CO2 analysis tubes are also available for ongoing testing, whilst CO2 dispersion tubing enables distribution of growth gas around your grow room.

A manual tester for CO2, contains air syringe with 3 glass test tubes.


C02 Analysis Kit £27
 
 
CO2 Analysis Kit

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Kit

CO2 Kit

 
   
This really is the easy and effective way to use CO2 injection. The advantage of this kit is that it comes with its own built-in special CO2 timer so that all you need do is tell it the size of your room and it does the rest for you. Designed for small to medium growrooms; use in multiples for large growrooms. Complete with informative instructions and five metres of CO2 dispersion tubing. Requires bottled CO2 (not supplied)

CO2 Kit

CO2 Kit Automatically Regulated £190
CO2 Kit Regulator Manual £185
Make an Offer

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Monitor and Doser - Computer Controlled Complete

The Evolution NDIR CO2 Sensor (Monitor)

The Evolution CO2 Sensor utilizes non dispersive Infra-Red sensing technology for fast accurate CO2 monitoring. Combined with exquisite design and ground breaking low price the sensor is highly accurate and less than half the price of similar products on the market and making available the ultimate control system to the average grower.

Evolution Digital Carbon Dioxide Controller (Doser)

This Controller is the most advanced of it's kind and has more features and functionality than any other product on the market. It can be used either with or with ought the Evolution Carbon Dioxide Sensor and can be interfaced to an external thermo / hygro stat providing a cheap entry level system with an easy & affordable upgrade path in the future.


C02 Monitor and Doser (more info) £600
Make an Offer
 
   
CO2 Monitor and Doser - Computer Controlled Complete

Click here for more info

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

Harvest Master CO ² Easi

A simple to use, innovative CO² sensor and controller, the Harvest Master CO² Easi Controller monitors the growing environment of your grow room – vital for healthy plant growth!

The operation of CO2 EASi.


CO2 EASi is intelligent control of CO2 and at the same time, an Intelligent Temperature controller when the COOL KIT is attached.

In Light ON periods (Day):
The controller will try to maintain Max co2 high PPM for the longest duration. It aggressively maintains the CO2 at and just above your target ppm value.

It will use COOL output to try to keep temp within 2’C/F of the Target Temperature (say 25’C/75’F).
If the temp rises too high (or there is no COOL unit), the FANS are activated at Max Temp, say 32’C/90’F.

In Lights OFF (night) periods:
The controller does not need to maintain CO2 levels.
For temperature control, automatically uses FANS as the cooling control, but will use COOL output if the temp stays/gets too high (as when the outside air being drawn in is from very hot outside)

 
   
Efficiency Monitoring.
On the display, you will see the “Efficiency % monitor”.
This unique Harvest Master feature is calculating how efficiently your room is operating!

• If FANS are activated, this is “wasted CO2 ”, reducing the efficiency.
• If COOL is activated, 99% efficiency is possible.

If you have been achieving high efficiency, but suddenly see a low efficiency rating, are;
• Door seals ok?
• CO2 device operating properly?
• Cooling unit operating OK?
What is wrong, that you may not have noticed otherwise!

Usage monitoring.
CO2 EASi has a “CO2 bottle life” timer.
Another unique Harvest Master feature!
• When emptied, select “New Tank” to reset the timer.
• Shows “% of Last tank used”, so you know to get a new tank organized.

Harvest Master CO2 Easi £699
Make an Offer

 [ Price Match ] [ Shopping Cart / Checkout ] [ Goto Top of Page ]

 

CO2 Release Systems

CO2 Cylinder Rentals

*Please note: CO2 bottles cannot be sent - only picked up from shop.

CO2 Analysis Kit £27
CO2 Cylinder Rentals 1 year
includes returnable deposit (£80)
£100
CO2 Cylinders Refills £25
CO2 Air Line 10m £7
Make an Offer



See Environmental Controls for combined CO2 and fan controllers.

The Growth Gas Generator produces CO2 by burning propane gas. This is a highly efficient and cost effective source of CO2 provided that it is used correctly. Normal propane greenhouse heaters are not the most efficient way of producing CO2 as they are usually controlled by thermostats. This means that CO2 production is tied to temperature, most being produced in the dead of night when plants cannot utilise it. Growth Gas Generator is designed specifically for CO2 production and the production of heat is minimised. Growth Gas Generator is usually operative for only a few minutes every hour to maintain optimum CO2 levels.

Instead of using bottled CO2 which sometimes can be difficult to obtain, this system burns propane gas (available nearly everywhere) to create atmospheric CO2. Like this Unis CO2 Controller, the Growth Gas Generator is supplied with a timer for really easy and effective injection. Requires bottled propane; not supplied.

 
Growth Gas Generator

Growth Gas Generator - grow
room heater and CO2 generator
£230
Make an Offer

 [ Price Match ]

 
[ Shopping Cart / Checkout ] [ Goto Top of Page ]
 Home : Manual : Video : Top Tips : About Us : Contact Us : FAQ : Projects : Affiliates : Links : Site Map
Search Products : Search Manual

  E S O T E R I C  H Y D R O P O N I C S T:  0 1 4 8 3  5 9 6 4 8 4 E:  w e b m a s t e r @ 1 - h y d r o p o n i c s . c o . u k