The Aqua master tools replaceable EC, CF, PPM electrode is easy to connect using the connector.
The electrode cannot be replaced with most conductivity meters because they generally do not break if properly maintained. However, due to aging, lime scale, leakage in the electrode, or cable breakage due to hardened plastic, the electrode can break. That is why the electrode is replaceable with our meter...
The Aqua master tools replaceable pH electrode is easy to connect using the BNC connector. Due to the long pH double junction electrode, it has a longer life.
Over time, pH electrodes age, even with good care and regular cleaning, the lifespan will be extended. However, over time, reference fluid will become contaminated and the electrode will continue to respond slowly. The gel-filled electrode will then have to be replaced...
The renewed Combo meter P700 Pro2 has a modern, robust housing. It is also equipped with a large screen on which all value can be read. In addition, the software has been improved, so that accurate measurements can now be read faster. The electrodes are easy to replace if worn or broken.
The Combo meter P700 Pro2 is ideal for measuring the pH, EC, CF, PPM and temperature of nutrient water for plants and water in swimming pools, jacuzzis and ponds. With th..
Our best-selling meter paired with the Leap pH Probe for quicker measurements in any substrate.
Take care of the fundamentals - Three-in-one portable solution
The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal nutrient uptake. With Bluelab’s Combo Meter Plus, you can measure all these fundamentals in one convenient, portable device.
While conductivity indicates the total amount of nutrients in your ..
Monitor your key parameters 24/7 - Save time and effort with continuous monitoring
With the Bluelab Guardian Monitor Connect Inline, you will be able to continuously monitor pH, EC and temperature in your nutrient feed line. There’s no need for manual spot checks; instead, you’ll ensure that your nutrient delivery system is working optimally at all times.
That’s because when you track the three fundamental parameters of nutrient uptake, you’re able t..
Introducing the Smart Batch Tank/Runoff Monitor, the ultimate solution for remote management and monitoring of your batch tanks or runoff zones. Equipped with Sensorex EC and pH probes, as well as inputs for level sensors, flow meters, temperature, pH, and EC, this powerful controller allows for accurate measurement and recording of pH and EC readings throughout the growth cycle.
Features:
Easy Calibration via the Growlink App
Plug & Play
R..
The HI-98197 is a waterproof, portable EC (conductivity) meter that has an expanded conductivity range from 0.000 µS/cm to 400 mS/cm, as well as TDS (Total Dissolved Solids), resistivity, and three salinity scales.
Conductivity & TDS
Salinity
Resistivity
This meter offers a quick connect four-ring probe and allows the user to adjust the nominal cell constant, HI-98197 is also ready to perform all three stages of USP <645> method required f..
Nido is the first intelligent and connected device for the management and monitoring of off-ground systems. Installable in a few minutes, it can automate your greenhouse in just a few simple steps via smartphone/tablet control.
All values in a single platform
Data monitoring, value management and device control via smartphones will allow you to create an ideal environment for the growth of healthy and extremely productive plants.
Compatible with any exi..
Automated Constant Control of Reservoir pH and Nutrient Levels
When connected to a dosing system the Bluelab Pro Controller Connect manages pH, conductivity and temperature levels in reservoirs. As your plants feed, pH and nutrients are automatically adjusted to the desired range. The controller allows you to monitor, data log and control your system in real time for immediate response to personalised settings and system alerts, direct from your computer...
The Nutradip GrowBoss sets a new standard for Nutrient Monitoring, ease of use and affordability.
The Nutradip Growboss is a nutrient monitoring system that assists growers in achieving maximum results for their growing efforts.
The Growboss is a constant monitoring meter that indicates to the grower the exact levels of Nutrient strength, pH and temperature.This allows the grower to adjust and optimize each parameter as the crop progresses through each g..
The HI-983302N has been engineered with a host of features suited for the aggressive environments commonly found in agricultural applications. Housings and cable connections have been sealed against vapor and humidity.
This EC meter comes with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean, is very stable and needs little maintenance.
The 12 VDC pow..
Used for Laboratory and Light Industrial Applications: Cells are made from graphite to provide good performance for the value. Choose from 2 cell constants: 0.1/cm and 1.0/cm. Process versions: with 10 ft (3m) cable, PT1000 temperature element, and tinned lead (for use with Growlink Batch Tank Monitors)..
Direct to Mobile 3 in 1 root zone measurements: Moisture, Nutrient & Temperature
Quickly and consistently measure moisture, nutrient (measured in conductivity) and temperature directly in the root zone without the need for pour-throughs, slurries or extractions.
Pulse connects directly to your smartphone via the Pulse app for automated data collection, measurement comparison, storage and exporting.
Works across a wide range of growing media includin..
Water resistant and chemically resistant, the HI-993301 has been designed to meet the grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.
This monitor has a backlit LCD and displays instantaneous readings of both EC or TDS and temperature-even from a distance.
This instrument features a stability indicator that prompts the user when to take the reading. For manual recording purposes, readi..
The Aqua-X Irrigation Controller is the main controller of the Aqua-X irrigation control system. With the combination of pH Sensor and EC/Temp Sensor, Aqua-X can monitor the pH, EC and Temp levels of the nutrient. With the use of 110V control board and 24V control board, the system could manage up to 30 individual outputs for multiple watering schedules.
With the innovative water detectors, the system could monitor each watering schedules with alerts for ..
HI 9914 is a wall mounted fertigation controller, designed to meet specific process control requirements in agricultural, horticultural and hydroponics applications. The controller is provided with two measuring channels, one for pH and one for conductivity. The readings are displayed simultaneously on two independent LCDs with backlight.
The conductivity probe is designed with a built-in temperature sensor which allows the controller to automatically com..
The HI-981405N is ideal for agricultural, horticultural and hydroponics applications where pH and EC levels need to be continuously monitored for optimal plant growth.
This instrument continuously monitors and displays the values of a solution on an easy to read set of LCD's.
The HI-1286 gel filled pH electrode is replaceable and the BNC connector is protected behind a water resistant sleeve. The unique design of the electrode guarantees greater clogging..
The HI 9813-5 is a versatile, water resistant, multiparameter portable instrument specifically designed for agricultural applications such as hydroponics, greenhouses, farming and nurseries.
This meter features a large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast and easy with knobs located on the front panel of the instrument. The HI 9813-5 is a pH/EC/TDS meter designed for simplicity of ..
The HI 9813-6 is a versatile, water resistant, multiparameter portable instrument specifically designed for agricultural applications such as hydroponics, greenhouses, farming and nurseries.
This meter features a large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast and easy with knobs located on the front panel of the instrument. The HI 9813-6 includes all the features of the HI 9813-5 while..
Always On. Being There Optional.
Monitor your dosing pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor Inline.
Built-in Wi-Fi (with option to disable)
High/low pH, temperature and conductivity alarms
Non-volatile memory – keep settings through power loss
Plant-safe green LEDs with adjustable display brightness
2 metre / 6.6 foot measurement probe ..
Always On. Being There Optional.
Monitor your reservoir pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor.
Built-in Wi-Fi (with option to disable)
High/low pH, temperature and conductivity alarms
Non-volatile memory – keep settings through power loss
Plant-safe green LEDs with adjustable display brightness
2 metre / 6.6 foot measurement probe cables
110 – 240 VAC (Mains p..
Intelligent Control
Doses up to 9 nutrients, additives and pH
Four (24 VDC) outputs available for irrigation if not used for nutrients.
Controls all growing methods - NFT, DFT/DWC, soil, media, drip, and aeroponics.
Proportional dosing rapidly adjusts between irrigations.
Sequential pump control allows each additive time to mix.
Displays EC, CF, TDS, ˚C, ˚F, pH
Set different Conductivity (EC) for day and night.
Water level control..
Everything you need to measure pH, conductivity and temperature
Handheld design is compact and convenient
The backlit display is bright and easy to read
Designed for nutrient reservoirs, the Bluelab pens are waterproof and float in any solution
Bluelab pH Pen
Measure pH and temperature
Double-junction probe and simple, 2-point pH calibration with 30-day reminder
Bluelab Conductivity Pen
Measure conductivity in EC, ppm 500..
24/7 control of your reservoir pH anywhere, anytime from your phone
Built-in Wi-Fi (with option to disable)
View and control on your mobile phone, visit Edenic.io for more information
Safety lockouts prevent excessive dosing
Auto-resume dosing after power loss
Precision dosing of pH adjuster with the built-in Bluelab peristaltic pump
Controls pH in the up (alkali) or down (acid) direction
High/low alarms to alert you when parameters ..
24/7 control of your reservoir pH, conductivity, and temperature anywhere, anytime from your phone
Built-in Wi-Fi (with option to disable)
Monitor and automate nutrient and pH dosing in reservoirs when paired with Bluelab PeriPod dosers
View and control on your mobile phone, visit Edenic.io for more information
Replaceable probes for pH (BNC connection), Temperature and Conductivity measurements
Safety lockouts prevent excessive dosing
..
New Version now available - Click Here
The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
Growlink's Fertigation System for Athena Pro Line Nutrients offers precision fertigation, utilizing quality HE Anderson pumpers and Growlink's Core controller and Pro platform. Easily manage your entire facility with just one system, for efficient and effective nutrient delivery.
Precision Fertigation: The GrowLink Fertigation System offers accurate and reliable nutrient dosing for hydroponic and soilless growing systems, ensuring maximum quality and yiel..
In just one glance it magically measures all 3 critical parameters for successful growth; pH, conductivity AND temperature.
The Bluelab Guardian Monitor is a constant indicator of the desired levels of EC/ppm 700/TDS/CF, pH and temperature, enabling the grower to optimise these parameters as the crop progresses through each growing phase.
The Bluelab Guardian Monitor is mains powered and is mounted to the wall or hung on a support and the probes..
The new Mini Doser EC nutrient controller can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel.
The controller continuously measures the nutrient concentration in the mixing tank and adds A and B nutrients as required to maintain the EC set point. The controller counts the number of doses and in theevent of the dose count per hour exceeding a set value and alarm can be sounded...
The Aqua master tools replaceable EC, CF, PPM electrode is easy to connect using the connector.
The electrode cannot be replaced with most conductivity meters because they generally do not break if properly maintained. However, due to aging, lime scale, leakage in the electrode, or cable breakage due to hardened plastic, the electrode can break. That is why the electrode is replaceable with our meter...
The Aqua master tools replaceable pH electrode is easy to connect using the BNC connector. Due to the long pH double junction electrode, it has a longer life.
Over time, pH electrodes age, even with good care and regular cleaning, the lifespan will be extended. However, over time, reference fluid will become contaminated and the electrode will continue to respond slowly. The gel-filled electrode will then have to be replaced...
The renewed Combo meter P700 Pro2 has a modern, robust housing. It is also equipped with a large screen on which all value can be read. In addition, the software has been improved, so that accurate measurements can now be read faster. The electrodes are easy to replace if worn or broken.
The Combo meter P700 Pro2 is ideal for measuring the pH, EC, CF, PPM and temperature of nutrient water for plants and water in swimming pools, jacuzzis and ponds. With th..
Our best-selling meter paired with the Leap pH Probe for quicker measurements in any substrate.
Take care of the fundamentals - Three-in-one portable solution
The fundamental parameters of pH, conductivity and temperature all play a pivotal role in driving optimal nutrient uptake. With Bluelab’s Combo Meter Plus, you can measure all these fundamentals in one convenient, portable device.
While conductivity indicates the total amount of nutrients in your ..
Monitor your key parameters 24/7 - Save time and effort with continuous monitoring
With the Bluelab Guardian Monitor Connect Inline, you will be able to continuously monitor pH, EC and temperature in your nutrient feed line. There’s no need for manual spot checks; instead, you’ll ensure that your nutrient delivery system is working optimally at all times.
That’s because when you track the three fundamental parameters of nutrient uptake, you’re able t..
Introducing the Smart Batch Tank/Runoff Monitor, the ultimate solution for remote management and monitoring of your batch tanks or runoff zones. Equipped with Sensorex EC and pH probes, as well as inputs for level sensors, flow meters, temperature, pH, and EC, this powerful controller allows for accurate measurement and recording of pH and EC readings throughout the growth cycle.
Features:
Easy Calibration via the Growlink App
Plug & Play
R..
The HI-98197 is a waterproof, portable EC (conductivity) meter that has an expanded conductivity range from 0.000 µS/cm to 400 mS/cm, as well as TDS (Total Dissolved Solids), resistivity, and three salinity scales.
Conductivity & TDS
Salinity
Resistivity
This meter offers a quick connect four-ring probe and allows the user to adjust the nominal cell constant, HI-98197 is also ready to perform all three stages of USP <645> method required f..
Nido is the first intelligent and connected device for the management and monitoring of off-ground systems. Installable in a few minutes, it can automate your greenhouse in just a few simple steps via smartphone/tablet control.
All values in a single platform
Data monitoring, value management and device control via smartphones will allow you to create an ideal environment for the growth of healthy and extremely productive plants.
Compatible with any exi..
Automated Constant Control of Reservoir pH and Nutrient Levels
When connected to a dosing system the Bluelab Pro Controller Connect manages pH, conductivity and temperature levels in reservoirs. As your plants feed, pH and nutrients are automatically adjusted to the desired range. The controller allows you to monitor, data log and control your system in real time for immediate response to personalised settings and system alerts, direct from your computer...
The Nutradip GrowBoss sets a new standard for Nutrient Monitoring, ease of use and affordability.
The Nutradip Growboss is a nutrient monitoring system that assists growers in achieving maximum results for their growing efforts.
The Growboss is a constant monitoring meter that indicates to the grower the exact levels of Nutrient strength, pH and temperature.This allows the grower to adjust and optimize each parameter as the crop progresses through each g..
The HI-983302N has been engineered with a host of features suited for the aggressive environments commonly found in agricultural applications. Housings and cable connections have been sealed against vapor and humidity.
This EC meter comes with a probe specifically made for horticulture and hydroponics applications. The probe compensates for temperature variations automatically, is easy to clean, is very stable and needs little maintenance.
The 12 VDC pow..
Used for Laboratory and Light Industrial Applications: Cells are made from graphite to provide good performance for the value. Choose from 2 cell constants: 0.1/cm and 1.0/cm. Process versions: with 10 ft (3m) cable, PT1000 temperature element, and tinned lead (for use with Growlink Batch Tank Monitors)..
Direct to Mobile 3 in 1 root zone measurements: Moisture, Nutrient & Temperature
Quickly and consistently measure moisture, nutrient (measured in conductivity) and temperature directly in the root zone without the need for pour-throughs, slurries or extractions.
Pulse connects directly to your smartphone via the Pulse app for automated data collection, measurement comparison, storage and exporting.
Works across a wide range of growing media includin..
Water resistant and chemically resistant, the HI-993301 has been designed to meet the grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.
This monitor has a backlit LCD and displays instantaneous readings of both EC or TDS and temperature-even from a distance.
This instrument features a stability indicator that prompts the user when to take the reading. For manual recording purposes, readi..
The Aqua-X Irrigation Controller is the main controller of the Aqua-X irrigation control system. With the combination of pH Sensor and EC/Temp Sensor, Aqua-X can monitor the pH, EC and Temp levels of the nutrient. With the use of 110V control board and 24V control board, the system could manage up to 30 individual outputs for multiple watering schedules.
With the innovative water detectors, the system could monitor each watering schedules with alerts for ..
HI 9914 is a wall mounted fertigation controller, designed to meet specific process control requirements in agricultural, horticultural and hydroponics applications. The controller is provided with two measuring channels, one for pH and one for conductivity. The readings are displayed simultaneously on two independent LCDs with backlight.
The conductivity probe is designed with a built-in temperature sensor which allows the controller to automatically com..
The HI-981405N is ideal for agricultural, horticultural and hydroponics applications where pH and EC levels need to be continuously monitored for optimal plant growth.
This instrument continuously monitors and displays the values of a solution on an easy to read set of LCD's.
The HI-1286 gel filled pH electrode is replaceable and the BNC connector is protected behind a water resistant sleeve. The unique design of the electrode guarantees greater clogging..
The HI 9813-5 is a versatile, water resistant, multiparameter portable instrument specifically designed for agricultural applications such as hydroponics, greenhouses, farming and nurseries.
This meter features a large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast and easy with knobs located on the front panel of the instrument. The HI 9813-5 is a pH/EC/TDS meter designed for simplicity of ..
The HI 9813-6 is a versatile, water resistant, multiparameter portable instrument specifically designed for agricultural applications such as hydroponics, greenhouses, farming and nurseries.
This meter features a large LCD that clearly displays the parameter being measured as well as calibration instructions. Calibration is fast and easy with knobs located on the front panel of the instrument. The HI 9813-6 includes all the features of the HI 9813-5 while..
Always On. Being There Optional.
Monitor your dosing pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor Inline.
Built-in Wi-Fi (with option to disable)
High/low pH, temperature and conductivity alarms
Non-volatile memory – keep settings through power loss
Plant-safe green LEDs with adjustable display brightness
2 metre / 6.6 foot measurement probe ..
Always On. Being There Optional.
Monitor your reservoir pH, Conductivity and Temperature with alerts on your phone when using the Wi-Fi capable Bluelab Guardian Monitor.
Built-in Wi-Fi (with option to disable)
High/low pH, temperature and conductivity alarms
Non-volatile memory – keep settings through power loss
Plant-safe green LEDs with adjustable display brightness
2 metre / 6.6 foot measurement probe cables
110 – 240 VAC (Mains p..
Intelligent Control
Doses up to 9 nutrients, additives and pH
Four (24 VDC) outputs available for irrigation if not used for nutrients.
Controls all growing methods - NFT, DFT/DWC, soil, media, drip, and aeroponics.
Proportional dosing rapidly adjusts between irrigations.
Sequential pump control allows each additive time to mix.
Displays EC, CF, TDS, ˚C, ˚F, pH
Set different Conductivity (EC) for day and night.
Water level control..
Everything you need to measure pH, conductivity and temperature
Handheld design is compact and convenient
The backlit display is bright and easy to read
Designed for nutrient reservoirs, the Bluelab pens are waterproof and float in any solution
Bluelab pH Pen
Measure pH and temperature
Double-junction probe and simple, 2-point pH calibration with 30-day reminder
Bluelab Conductivity Pen
Measure conductivity in EC, ppm 500..
24/7 control of your reservoir pH anywhere, anytime from your phone
Built-in Wi-Fi (with option to disable)
View and control on your mobile phone, visit Edenic.io for more information
Safety lockouts prevent excessive dosing
Auto-resume dosing after power loss
Precision dosing of pH adjuster with the built-in Bluelab peristaltic pump
Controls pH in the up (alkali) or down (acid) direction
High/low alarms to alert you when parameters ..
24/7 control of your reservoir pH, conductivity, and temperature anywhere, anytime from your phone
Built-in Wi-Fi (with option to disable)
Monitor and automate nutrient and pH dosing in reservoirs when paired with Bluelab PeriPod dosers
View and control on your mobile phone, visit Edenic.io for more information
Replaceable probes for pH (BNC connection), Temperature and Conductivity measurements
Safety lockouts prevent excessive dosing
..
New Version now available - Click Here
The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark fo..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
The Bluelab Dosetronic keeps tight control of your vital nutrient solution levels automatically so you have the freedom to tend to the daily needs of your crop.
This is the ultimate answer for accurate and automatic control of EC, pH and temperature in hydroponic systems. The controller is easily programmed with the required values for pH, conductivity and temperature. The dosing intervals are set according to the size of the tank and then it’s ..
Growlink's Fertigation System for Athena Pro Line Nutrients offers precision fertigation, utilizing quality HE Anderson pumpers and Growlink's Core controller and Pro platform. Easily manage your entire facility with just one system, for efficient and effective nutrient delivery.
Precision Fertigation: The GrowLink Fertigation System offers accurate and reliable nutrient dosing for hydroponic and soilless growing systems, ensuring maximum quality and yiel..
In just one glance it magically measures all 3 critical parameters for successful growth; pH, conductivity AND temperature.
The Bluelab Guardian Monitor is a constant indicator of the desired levels of EC/ppm 700/TDS/CF, pH and temperature, enabling the grower to optimise these parameters as the crop progresses through each growing phase.
The Bluelab Guardian Monitor is mains powered and is mounted to the wall or hung on a support and the probes..
The new Mini Doser EC nutrient controller can work in units of EC, CF or TDS. The complete kit comes with a sensor and two economy solenoid valves pre-wired on a small panel.
The controller continuously measures the nutrient concentration in the mixing tank and adds A and B nutrients as required to maintain the EC set point. The controller counts the number of doses and in theevent of the dose count per hour exceeding a set value and alarm can be sounded...