Useful device for controlling temperature level inside the growing
room to turn off lights for a specific period of time when the
temperature reaches a dangerous limit.
Easy setting with two knots for both temperature and time periods.
Can be used with a maximum 2000W power on the lamps.
Controls lighting
Up to 16 amps
Easy setting
Adjustable delay (lighting)
Plug-and-play
Max. power 2000 watts..
For those who do not (yet) want to move to EC fans, we have an intelligent AC fan control module for the ELF controllers, that will control your current AC fans as efficient and quiet as possible. On low speed we use burst modulated AC control to reduce losses and reduce hum in the fan motor, on higher speed settings the controller switches to phase cut control, which is more efficient in those stages. The EFM can be plugged in between your power outlet an..
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The built in photocell also ..
The thermal cut out box is compatible with all 26 amp contactor timer relays, the unit is built with the highest quality components and contains a very accurate thermostat. This equipment can come in very handy in the event of cooling failure, it adds a very valuable safety net to your grow room. You set the thermostat to the maximum temperature, we recommend 30 degrees Celsius, in the Event of fan or AC failure the Thermal cut off box will cut the power t..
In many situations, Flairform’s electrode cleaner eliminates the need to re-calibrate.
Electrode cleaners are usually made from acids, alkalis or chelates. However, these chemicals are largely ineffective for cleaning electrodes that have been contaminated by nutrient solutions.
Flairform Electrode Cleaner is:
Suitable for both pH & conductivity meter electrodes.
Removes both inorganic and organic contamination.
Restores electrode accuracy and respon..
A custom fit so you can use and read your Bluelab Meter right from the carry case.
The Bluelab Carry Case has a firm outer casing which offers impact resistance for your Meter. There are two pockets in the top of the case specially made for the probes.
A removable and adjustable shoulder strap provides even more comfort and convenience. Place over your shoulder, hold onto the carry case and place the probes into the nutrient tank.
In-between use, we rec..
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.
5 metre male/male active connector ..
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.
Y Active Splitter cable
For u..
Introducing the new Biowave DI 9200-ITQ
The DI-9200-ITQ-is a new intelligent version of the DL-9200. The form factor is the same but with addition, underneath the dome, of a box that contains the ITQ software and hardware.
It features B-wave proprietary software and hardware that are a must have for a computerized greenhouse or a technically advanced smaller grow op which wants the epitome of BioWave features.
New features
New Digital T..
Biowave Micro for Small Indoor Grow Rooms
Perfect for 10×10 grow tents
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yie..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields.
This unit attaches to ceiling with ratchet pulleys or has legs that..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields. The 9200 unit is specifically designed for indoor plants.
It is plu..
With the EL1F you can control up to 80 lights in 1 room with 1 EC Fan and 1 Temperature controller. To control 2 rooms you will need the EL2F or 2 x EL1F controllers.
The EL F controllers are new to the family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm:
0-10V EC fan control
Intelligent PID fan control
Non-volatile memor..
The EL2F is capable of controlling up to 80 lights, 2 rooms, 2 x EC fans, 2 x ECMs (external contactor module) (sold seperately) for heaters, humidifiers, dehumidifers, CO2 etc.
The EL F controllers are new to the family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm:
0-10V EC fan control
Intelligent PID fan control
Non-vol..
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes.
Features
SDI-12 Interface
3-element 10 cm stainless steel waveguide
5 m 3-conductor waterproof cable (standard)
Waterproof Epoxy-filled Housing
20% to 80% Incident Wave Rise Time: 300 ps
Waveform Digitizing Resolution: 5 ps
Incident Wave Amplitude:&nbs..
Fully portable handheld PAR meter features our highly accurate, integrated Quantum Sensor that measures PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700 nm. It measures up to 10,000 μmol compared with 2,000 μmol for other meters on the market.
Data logging capability using standard mini-USB cable and proprietary data logging software available at hydrofarm.com
Low power consumption with built-in low battery power in..
Useful device for controlling temperature level inside the growing
room to turn off lights for a specific period of time when the
temperature reaches a dangerous limit.
Easy setting with two knots for both temperature and time periods.
Can be used with a maximum 2000W power on the lamps.
Controls lighting
Up to 16 amps
Easy setting
Adjustable delay (lighting)
Plug-and-play
Max. power 2000 watts..
For those who do not (yet) want to move to EC fans, we have an intelligent AC fan control module for the ELF controllers, that will control your current AC fans as efficient and quiet as possible. On low speed we use burst modulated AC control to reduce losses and reduce hum in the fan motor, on higher speed settings the controller switches to phase cut control, which is more efficient in those stages. The EFM can be plugged in between your power outlet an..
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The built in photocell also ..
The thermal cut out box is compatible with all 26 amp contactor timer relays, the unit is built with the highest quality components and contains a very accurate thermostat. This equipment can come in very handy in the event of cooling failure, it adds a very valuable safety net to your grow room. You set the thermostat to the maximum temperature, we recommend 30 degrees Celsius, in the Event of fan or AC failure the Thermal cut off box will cut the power t..
In many situations, Flairform’s electrode cleaner eliminates the need to re-calibrate.
Electrode cleaners are usually made from acids, alkalis or chelates. However, these chemicals are largely ineffective for cleaning electrodes that have been contaminated by nutrient solutions.
Flairform Electrode Cleaner is:
Suitable for both pH & conductivity meter electrodes.
Removes both inorganic and organic contamination.
Restores electrode accuracy and respon..
A custom fit so you can use and read your Bluelab Meter right from the carry case.
The Bluelab Carry Case has a firm outer casing which offers impact resistance for your Meter. There are two pockets in the top of the case specially made for the probes.
A removable and adjustable shoulder strap provides even more comfort and convenience. Place over your shoulder, hold onto the carry case and place the probes into the nutrient tank.
In-between use, we rec..
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.
5 metre male/male active connector ..
Active cables for GAS active fan controllers.
The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers.
You must use active cables with controllers that are designed for Active Cables, these have white connections.
Y Active Splitter cable
For u..
Introducing the new Biowave DI 9200-ITQ
The DI-9200-ITQ-is a new intelligent version of the DL-9200. The form factor is the same but with addition, underneath the dome, of a box that contains the ITQ software and hardware.
It features B-wave proprietary software and hardware that are a must have for a computerized greenhouse or a technically advanced smaller grow op which wants the epitome of BioWave features.
New features
New Digital T..
Biowave Micro for Small Indoor Grow Rooms
Perfect for 10×10 grow tents
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yie..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields.
This unit attaches to ceiling with ratchet pulleys or has legs that..
The BioWave Subsonic Harmonic Wave Machine creates a subsonic harmonic wave that improves plant respiration, increasing plant yields by an average of 20% and total dissolved solids by a whopping 55%! This revolutionary, patent-pending machine enhances plant metabolism, photosynthesis and health so your hydroponic plants grow more rapidly, resist diseases better, and produce larger yields. The 9200 unit is specifically designed for indoor plants.
It is plu..
With the EL1F you can control up to 80 lights in 1 room with 1 EC Fan and 1 Temperature controller. To control 2 rooms you will need the EL2F or 2 x EL1F controllers.
The EL F controllers are new to the family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm:
0-10V EC fan control
Intelligent PID fan control
Non-volatile memor..
The EL2F is capable of controlling up to 80 lights, 2 rooms, 2 x EC fans, 2 x ECMs (external contactor module) (sold seperately) for heaters, humidifiers, dehumidifers, CO2 etc.
The EL F controllers are new to the family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm:
0-10V EC fan control
Intelligent PID fan control
Non-vol..
A fully integrated digital TDR soil moisture sensor from the Soil Smart series. Works well in various soil types and soilless media. Sized with 10 cm waveguide rods to fit well with rockwool cubes.
Features
SDI-12 Interface
3-element 10 cm stainless steel waveguide
5 m 3-conductor waterproof cable (standard)
Waterproof Epoxy-filled Housing
20% to 80% Incident Wave Rise Time: 300 ps
Waveform Digitizing Resolution: 5 ps
Incident Wave Amplitude:&nbs..
Fully portable handheld PAR meter features our highly accurate, integrated Quantum Sensor that measures PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700 nm. It measures up to 10,000 μmol compared with 2,000 μmol for other meters on the market.
Data logging capability using standard mini-USB cable and proprietary data logging software available at hydrofarm.com
Low power consumption with built-in low battery power in..