Search
Search
Product Compare (0)
Trolmaster (HS-1) Humidistat Station for Hydro-X System
HS-1 Humidistat Station is specifically designed to control dehumidifiers via the Hydro-X Control System. It will control your dehumidifier by Day/Night setpoint based on the photocell status. HS-1 Features LCD Display, Easy Operation Seamless Connection with Hydro-X Micro-SD for Firmware Upgrade Address Assignment Plug & Play Connect the HS-1 to where your thermostat is on the wall by using the pre-existing wires, now you can use the HS-1 in..
£122.99
Ex Tax:
GAS Cable Pack 8 for GAS EC System
Active cables for GAS active fan controllers. The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers. You must use active cables with controllers that are designed for Active Cables, these have white connections. 5 metre male/male active connector ..
£12.95
Ex Tax:
GAS Cable Pack 9 for GAS EC System
Active cables for GAS active fan controllers. The white active cables have all three pins connected, it has a power cable from the fan. This means the controllers can be powered from the fan without being connected to the mains, meaning less plugs needed in your grow room. Compatible with all our controllers. You must use active cables with controllers that are designed for Active Cables, these have white connections. Y Active Splitter cable For u..
£18.95
Ex Tax:
GAS Cable Pack 11 for GAS EC System
Connect two male cables with the Female to Feamale cable. Active cable must be used with active male cables. ..
£9.95
Ex Tax:
GAS Cable Pack 13 for GAS EC System
Terminates the EC socket in a Systemair EC fan so that the fan runs at 100% power all the time. ..
£7.95
Ex Tax:
AdViroVent Bronze DIY Water Cooled Air-Con Units for 4 to 6 (600W) Lights
AdViroVent Water Cooled AC System for 4-6 600W Grow Lights Our water to waste systems comprise of an indoor and outdoor unit similar to conventional ac systems. The difference being the outdoor unit is connected to the mains water supply which the system uses to remove the heat instead of a conventional fan. The outdoor unit can be located internally and just requires a water supply and drain. As with our other systems the wiring is plug and play and the..
£55.95
Ex Tax:
AdViroVent Bronze DIY Water Cooled Air-Con Units for 10 to 16 (600W) Lights
AdViroVent Water Cooled AC System for 10-14 600W Grow Lights Our water to waste systems comprise of an indoor and outdoor unit similar to conventional ac systems. The difference being the outdoor unit is connected to the mains water supply which the system uses to remove the heat instead of a conventional fan. The outdoor unit can be located internally and just requires a water supply and drain. As with our other systems the wiring is plug and play and t..
£55.95
Ex Tax:
AdViroVent Silver DIY Water Cooled Air-Con Units for 4 to 6 (600W) Lights
AdViroVent Water Cooled AC System for 4-6 600W Grow Lights Our water to waste systems comprise of an indoor and outdoor unit similar to conventional ac systems. The difference being the outdoor unit is connected to the mains water supply which the system uses to remove the heat instead of a conventional fan. The outdoor unit can be located internally and just requires a water supply and drain. As with our other systems the wiring is plug and play and the..
£55.95
Ex Tax:
AdViroVent Silver DIY Water Cooled Air-Con Units for 10 to 14 (600W) Lights
AdViroVent Water Cooled AC System for 4-6 600W Grow Lights Our water to waste systems comprise of an indoor and outdoor unit similar to conventional ac systems. The difference being the outdoor unit is connected to the mains water supply which the system uses to remove the heat instead of a conventional fan. The outdoor unit can be located internally and just requires a water supply and drain. As with our other systems the wiring is plug and play and the..
£55.95
Ex Tax:
AdViroVent Simple DIY Water Cooled Air-Con Units for 4 to 5 (600W) Lights
Simple DIY Water Cooled Air-Con Unit for 4 to 5 600W Grow Lights This unit is installed inside the room and piped into the water supply, the water warmed by the unit cooling the room is run to the drain. body table tr td { padding-left: 4px; } .spec {font-weight:600; font-size:12px!important;} .spec-detail { font-weight: normal; font-size: 12px!important; text-align: left; } Simple 4-5 Light (600W) Water Cooled Air-Con System Specific..
£6,583.95
Ex Tax:
Dimmer for Fluence Spydr (2x, 2p and 2i)
Dimmer for Fluence Spydr range, work with the 2x, 2p and 2i. Comes with 2.5m cable and can control one light. Made in Germany with CE certification...
£131.95
Ex Tax:
IWS 6.5L Aqua Pot for Clay Pebbles
The IWS 6.5L pot designed for the use with clay pebbles. Dimensions Height: 185mm Diameter: 285mm..
£5.95
Ex Tax:
IWS 6.5L Culture Pot for Soil, Coco and Mixed Media
The IWS 6.5L pot designed for the use with soil, coco and mixed media. Dimensions Height: 185mm Diameter: 285mm..
£5.95
Ex Tax:
IWS 9.5L Punched Pot for Any Media
The IWS 6.5L pot designed for the use with any media. Dimensions Height: 185mm Diameter: 285mm..
£5.95
Ex Tax:
HI-76410/4 Galvanic DO probe for HI-8410 process, 4 m cable
Galvanic DO Probe with Internal Temperature Sensor, DIN Connector, and 4m Cable for use with HI-8410 This galvanic dissolved oxygen probe is designed to work with the HI-8410 to monitor the concentration of DO in a wide range of industrial process applications. Galvanic technology Built-in temperature sensor for Automatic Temperature Compensation Built for everyday, demanding use in industrial applications Key features Galvanic DO probe - Pro..
£892.44
Ex Tax:
Float for Mist Maker 12
The Float for Mist Maker 12 is specifically designed to be used in conjunction with the Mist Maker 12 5300ml/hr (DK12)...
£24.99
Ex Tax:
GAS Cable Pack 16 for HyperFan V2 EC Compatability
This cable pack enables compatibility between GAS EC fan controllers and the HyperFan V2. ..
£5.99
Ex Tax:
GAS Minute Timer for Pumps etc
The G.A.S. minute timer offers precision feeding that can be adjusted to suit the life stage of the plant. The greater control results in plants being fed little and often ensuring a greater uptake of nutrient solution, increased access to and absorption of oxygen, and ultimately improved yields. Ideal for use with all timed grow systems Range from 1-10 minutes Suitable for use with pumps up to a total of 500W max The G.A.S. Minute Timer i..
£72.95
Ex Tax:
Aqua Master Replacement pH Electrode for P700 Pro2 Combo Meter
The Aqua master tools replaceable pH electrode is easy to connect using the BNC connector. Due to the long pH double junction electrode, it has a longer life. Over time, pH electrodes age, even with good care and regular cleaning, the lifespan will be extended. However, over time, reference fluid will become contaminated and the electrode will continue to respond slowly. The gel-filled electrode will then have to be replaced...
£62.95
Ex Tax:
Aqua Master Replacement EC, CF, PPM Electrode for P700 Pro2 Combo Meter
The Aqua master tools replaceable EC, CF, PPM electrode is easy to connect using the connector. The electrode cannot be replaced with most conductivity meters because they generally do not break if properly maintained. However, due to aging, lime scale, leakage in the electrode, or cable breakage due to hardened plastic, the electrode can break. That is why the electrode is replaceable with our meter...
£62.95
Ex Tax:
Aqua Master Replacement Electrode for P100 Pro Combo Pen
Suitable for the Combo Pen P100 Pro. Please refer to the P100 Pro User Guide for instructions on how to replace the electrode...
£44.95
Ex Tax:
GAS Cable Pack 10 (for Gavita ELF to SystemAir EC Fans)
Cable pack 10 connects SystemAir EC Fans to Gavita ELF controllers, or EC fans to a Gavita Fan Balancer. ..
£18.95
Ex Tax:
Fan / Pump Controller for OptiClimate Cooler
Fan / Pump Controller for OptiClimate Cooler...
£587.95
Ex Tax:
Bluelab Replacement pH adjuster dosing tube for pH Controller (13 ft /4 m)
Use with: Bluelab pH Controller and Bluelab pH Controller Connect...
£69.95
Ex Tax:
OptiClimate Cable for Remote Control
OptiClimate cable for remote control. This OptiClimate cable for the remote control of the OptiClimate water-cooled air conditioners...
£36.99
Ex Tax:
PotSock - Round for XL Pot
PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot! Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots. PotSocks are great for growers cultivating long term crops or simply plants with a very aggressive root system. Available in square or round variations, to fit the easy2grow, 1Pot or XL pots. They’re also the ideal solution for growers using fabric air pruning pots in..
£8.63
Ex Tax:
PotSock - Square for 8.5 & 15ltr Pot
PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot! Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots. PotSocks are great for growers cultivating long term crops or simply plants with a very aggressive root system. Available in square or round variations, to fit the easy2grow, 1Pot or XL pots. They’re also the ideal solution for growers using fabric air pruning pots in..
£3.64
Ex Tax:
RayTemp 38 Infrared Thermometer
The RayTemp 38 is a professional infrared, gun-shaped, non-contact thermometer with dual laser dot alignment. The thermometer incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables users to measure small targets from a distance. The user stands a safe and comfortable distance from the target, points the thermometer at the surface to be measured, pulls the trigger and instantly reads the temperature. Ideal for measuring the temperatu..
£244.95
Ex Tax:
Quest Hanging Kit for Quest 70
Hanging kit for overhead mount. Includes (4) eyebolts, (4) cables with carabiners and (2) brackets..
£82.95
Ex Tax:
Quest Hanging Bracket for Quest 105, 155, 165, 205, 225 and 185 Cool
Quest Part Number: 4036668 Requires 2 brackets per dehumidifier. Fits Quest Models: Quest Dual 105 – PN 4032270 Quest Dual 155 – PN 4031490 Quest Dual 205 – PN 4033060 Quest Dual 225 – PN 4035400 Quest 185 Cool – PN 4033180..
£49.95
Ex Tax:
Quest Supply Duct Kit for Dual 105, 155, 165, 205, 225, and 185 Cool
Quest Part Number: 4028607 Supply duct kit for Dual 105, Dual 155, and Dual 205 models Includes 2 10″ duct collars, screws and foam for securely sealing to unit Does not include ductwork or register grill..
£66.95
Ex Tax:
Quest Return Duct Kit for Dual 105, 155, 165, 205, 225, and 185 Cool
Quest Part Number: 4028610 Includes duct plate with 12″ duct collar, screws, and foam for securely sealing to the unit...
£99.95
Ex Tax:
NIDO Gate (for NIDO Felix LED)
It allows full control by NIDO App; you decide the right power of light in each phase of your plant, optimizing consumption. NIDO GATE works only connected to NIDO ONE.. Sunrise/Sunset function Any abrupt change can affect the yield, going from ON to OFF remains unnatural for your plant. A harmonious transition between day and night has a positive effect on the metabolism of the plant, favoring the production of Auxina, a hormone that controls growth and..
£253.95
Ex Tax:
Maxibright Daylight iLink Data Cable 2m
For use with 660W, 660W Pro and 480W Pro LED Lighting Systems (Excluding DAYLIGHT 660W LED (2019)). Link up to 100 LED units with ease, and control via the DAYLIGHT Lighting Controller.Length: 2m..
£13.95
Ex Tax:
Kahn VAIO 2 Climate Control Unit for 6 X 600W Lights
Versatile All In One Next generation climate control unit, no outdoor unit required – everything is contained in the sleek attractive indoor unit, simply hang in room / tent and switch it on. Set up in less than 5 mins without the worry of losing refrigerant gas! Ideal for start up / small set up or for curing fruit during the summer months when intake temps are above the ideal. No outdoor unit – no piping required Heats / Cools Simple to install – ..
£5,500.95
Ex Tax:
Spiked Feet for Build-a-Cage Fruit & Veg Cages
Tough, durable spiked feet for securing your GardenSkill Build-a-Cage Fruit Cage to the ground. Fit these spikes inside our 16mm diameter 'vertical' aluminium tubes and then simply stake them into the ground for extra purchase and grip for your cages. Suitable for all sizes of Build-a-Cage. Available in packs of 5 and 10. Secure your Build-a-Cage fruit cage into the ground Spikes fit inside our 16mm aluminium tubes Stake into the ground for extra purc..
£6.95
Ex Tax:
Trolmaster (MBS-Pro) 4-in-1 Sensor for Hydro-X Pro only
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only. Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The s..
£727.95
Ex Tax:
60L Blue Drum (for Multipod & HyperPod)
60L UN HDPE plastic drum with lever locking ring. Contact us for any special requirements...
£44.95
Ex Tax:
Impeller for NJ1200, NJ2400 and NJ3500
Replacement impella for the NJ1200, NJ2400 and NJ3500 pumps...
£21.95
Ex Tax:
Impeller for MaxiJet MJ500 and MJ1000
Replacement impeller assembly for the MaxiJet MJ500, MJ1000 impeller assemblies are currently unavailable...
£10.95
Ex Tax:
Spider Farmer SF600 74W LED Grow Light For Veg
Spectrum: 660-665nm,730-740nm,2800K-3000K,4800-5000K Par Value: 166.81umol/S Lumen: 10718Lm±5%@AC120V 10799Lm±5%@AC240V Power draw: 73.79W±5%@AC120V 74.75W±5%@AC240V Light Size: 1000*150*35.4MM Package Size: 1132*208*87MM Gross Weight: 1.872KG DB: 0dB Input Voltage: AC100-240V Amp: 0.6235A@AC120V 0.6310A@AC240V Frequency: 50-60HZ LED: 384pcs Coverage: 2'x4'..
£148.95
Ex Tax:
Idrolab Idrocap for Idropot
Idrocap is a revolutionary diffusion device for precision irrigation in hydroponic and soil-free systems that enables the optimization of water distribution and efficency of your plantation, making you save water, time and money. You can integrate an irrigation system or you can still take advantage of Idrocap with manual irrigation. Thanks to the honeycomb design you will be able to water with uniformity the whole surface of your cultivation medium. Idr..
£7.95
Ex Tax:
GUARD'n'AID for SpiderMite - 250ml
Pyrethrum based target contact insecticide for the use against SpiderMite and their eggs. Pyrethrins as an oil based formulation with added Canola oil at the high level of 83% targets the respiratory organ and nervous system of insects. This 250ml concentrate will make up 15 x 750ml sprays - ideal for use with the Guard 'n' Aid Pistol..
£24.99
Ex Tax:
GUARD'n'AID for Thrips - 250ml
Guard 'n' Aid for Thrip is an insecticide specially developed for use against Thrips at larval, adult and egg stages. Suitable for use in protected crops and outdoor growing areas. Also suitable for both non edible and edible crops. The Guard 'n' Aid for Thrip is supplied in a 250ml concentrate that will make up 22 x 750ml spray applications...
£24.99
Ex Tax:
Trolmaster (LMA-13) for Sunsystem Ballasts - Hydro-X
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This Light..
£137.95
Ex Tax:
Trolmaster (ECS-4) 16ft Extension Cable for AMP-2 Sensor Board - Aqua-X
The ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between AMP-2 sensor board and the main controller. Features: Seamless Connection Plug & Play..
£21.99
Ex Tax:
LightHouse HYDROSTIK Glue for Mylar - 500ml
The HYDROSTIK is an Adhesive which will bond to most materials including Carpets & carpet tiles, felt, textiles, fabrics, insulation, wood, stone, concrete, plasters, some plastics, polythene, canvas, foam, cork, cardboard & paper. It is used in flooring, furniture manufacturing and thermal insulation. Directions for Use: Shake can before use. Apply adhesive from 10 - 20cm. Apply adhesive to both surfaces for a stronger bond. Surfaces to be joine..
£4.99
Ex Tax:
Net Pot for Oxypot and IWS R/DWC Systems
Replacement Net Pot for Oxypot and IWS R/DWC Nutriculture systems...
£1.99
Ex Tax:
LED Driver Remote Use 5m Extension Cables (x3) for Zeus 1000W Xtreme
These three 5m long Extension Cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remotely and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 3 elements: 2x 5m Extension Power Cable for LED driver 5m Extension Dimming Cable..
£44.99
Ex Tax:
Street Light PL Controller for Street Light Fixtures & Ballasts
Control up to 100 Street Light PL Fixtures and Ballasts. Contents: 1 x Controller unit 1 x mains plugtop to USB adaptor and USB power lead 2 x wired all-in-one temperature and humidity sensors 2 x RJ11 cables 1 pack of wall-mounting fittings (bracket, wall plugs, screws) Features: Controls up to 2 rooms of lights completely separately Each room can have separate switch-On and switch-Off times Dims the lights automatically from betwee..
£252.95
Ex Tax:
Adjust-A-Wings Wire Hook Screw Kit for Medium Wings
Adjust-A-Wings Wire Hook Screw Kit for Medium Wings..
£12.95
Ex Tax:
SpongePot for Seedlings & Cuttings
Nothing is more aggravating than seeing only half of the seeds emerge after the first week. With Spongepot you won’t have this problem anymore! The product contains everything that is required for optimal propagation. Spongepot is super simple to use: Just dissolve the bacto in water, water the trays and plant your seeds on the ready-made seed holes. Super healthy The young plants are less susceptible to external influences. Explosive root growt..
£6.95
Ex Tax:
-Sensor-Board-for-Aqua-X-Pro-Only-228x228.jpg "Trolmaster (AMP-3) Sensor Board")
Trolmaster (AMP-3) Sensor Board
The AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro/Tent-X Controller. It is specially designed for the Aqua-X and Tent-X system. It can be connected to the main controller with a standard RJ12 cable. Multiple units can be connected into one system for multiple monitoring applications. The pH level, EC level and water temperature will be displayed on its LCD screen and the master controller..
£144.99
Ex Tax:-Dry-Contact-Board-for-Hydro-X-Pro-and-Aqua-X-Pro-228x228.jpg "Trolmaster (OM-8) Dry Contact Board for Hydro-X Pro and Aqua-X Pro")
Trolmaster (OM-8) Dry Contact Board for Hydro-X Pro and Aqua-X Pro
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical contacts, and allows up to 12 Amp current through each contact. *The OM-8 should be mounted inside an electric control cabinet, and connected to a power supply between 100-240 VAC. *When used with the Aqua-X Pro system, OM-8 can activate pumps/solenoids at a h..
£511.95
Ex Tax:-228x228.jpg "Trolmaster (DFM-1) Digital Flow Meter to the Controller for Aqua-X Pro Only")
Trolmaster (DFM-1) Digital Flow Meter to the Controller for Aqua-X Pro Only
The DFM-1 is a 1" digital inline flow meter provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may inc..
£172.95
Ex Tax:
Trolmaster (ECS-6) 16ft Extension Cable for WCS-1 & WCS-2
The ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 & WCS-2 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe...
£35.95
Ex Tax:-3-in-1-Sensor-for-Hydro-X-Only-228x228.jpg "TrolMaster (MBS-TH) 3-in-1 Sensor for Hydro-X Only")
TrolMaster (MBS-TH) 3-in-1 Sensor for Hydro-X Only
3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors" Features: Built-In Photocell Detecting Day/Night Mode Plug & Play Specifications: Output Voltage: 0~11.5V Maximum Current: 0.2A Wor..
£79.99
Ex Tax:
Trolmaster (ECS-8) 32ft Extension Cable for IR Emitter
The ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1...
£36.95
Ex Tax:-CO2-Sensor-for-Carbon-X-228x228.jpg "Trolmaster (MBS-K30) CO2 Sensor for Carbon-X")
Trolmaster (MBS-K30) CO2 Sensor for Carbon-X
The ability to read up to 30,000 ppm CO2 is critical to the proper operation and safety of an emergency CO2 system like the Carbon-X. The MBS-K30 is Trolmaster’s newest CO2 sensor, which incorporates a NDIR 0-30,000 ppm sensor in a self-aspirated enclosure. The MBS-K30 also features a built-in LCD display that will constantly display the current CO2 level (ppm). Each of the zones / rooms monitored by the Carbon-X can have 1 or 2 MBS-K30 CO2 sensors i..
£500.95
Ex Tax:-228x228.jpg "25-13mm Adaptor (for Aquaking pumps)")
Trellis Netting Support System 4' x 8' for XTrays Bench
With XTrays trellis netting support systems you can grow monster plants without the risk of falling and snapping. Its heavy duty steel construction keeps large plants in there place and supports the heaviest of harvest’s. The XTrays support trellis is a must have for plant pruning, training and will give larger yields with the least mount of maintenance. Designed specifically for XTrays trays and rolling benches th..
£281.95
Ex Tax:
Trellis Netting Support System 10' x 5' for XTrays Bench
With XTrays trellis netting support systems you can grow moster plants without the risk of falling and snapping. Its heavy duty steel construction keeps large plants in there place and supports the heaviest of harvest’s. The XTray support trellis is a must have for plant pruning, training and will give larger yields with the least mount of maintainance. Designed specifically for XTray trays and rolling benches the ..
£0.00
Ex Tax:
Legs for Table Supports
Table support legs available in sets of 4 units and in heights of 58 cm (long) and 16 cm (low) that are perfectly adapted for the use of the tanks of 180 liters, 275 liters (high legs) and the large high tray of 100 x 55 x 15 cm ( low legs) with a capacity of 65 liters if used as a drainage tank...
£111.95
Ex Tax:
Milwaukee M10016B Cleaning Solution for Electrodes 25 x 20ml
Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that ..
£42.95
Ex Tax:Milwaukee M10016B Cleaning Solution for electrodes 1 x 20ml
Electrode cleaning solution is ideal for cleaning all pH, ORP and TDS meter's probes. To help maintain high performance and accuracy for any electrode, regular cleaning is required to remove the build up of dirt and setiment on the glass or carbon surfaces of a sensing probe. Use M10016B to help extend the life of the meter's electrode. Electrode cleaning solution should not be a substitute for rinse and or storage solutions. Sachet packaging means that ..
£1.95
Ex Tax:
Milwaukee MA9015 Storage Solution for pH / ORP Electrodes
MA9015 is a lab grade electrode storage solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens. To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out. Properly storing your pH electrode in a solution keeps the glass membrane well hydrated which maintains proper function and provides accurate read..
£13.95
Ex Tax:
Soil Starter Pack - Hard Water
Not sure what Dutchpro can do for you? Try it out with one of our Dutchpro packs. These authentic Amsterdam designed canal houses give you the opportunity to try our award winning nutrients at a significant reduced price. Each Hydro/Coco or Soil starter pack contains everything you need to conduct a small scale grow! Not only does this pack gives you a taste of our amazing grow- and bloom nutrients, but you also get the whole selection of Dutchpro additiv..
£89.95
Ex Tax:
Thermometer Waterproof Probe For Nutrient Temp & Grow Room
Grow Gadgets Thermometer Waterproof Probe is designed to give fast and accurate temperature readings in damp conditions. Designed for Easy Reading At the push of a button, Grow Gadgets Thermometer will display the highest and lowest values recorded since the unit was last reset, on its large LCD, designed for easy reading. This high-quality tool can also display in both F or C, purely for the grower’s convenience - it is so simple to use! Features La..
£5.95
Ex Tax:
Hanna Groline Professional pH & Temp Meter for Soil HI-98168
Designed for agricultural professionals, this meter joins the Hanna 98 series of quality pH meters which are rugged and portable with the performance and features of a benchtop. It is also an addition to the GroLine range. Application importance The measurement of pH in agricultural activities is very important due to the influence it has on the growth of the plant. Soil can be acid, neutral or alkaline according to its pH value. Most plants prefer a..
£1,313.69
Ex Tax:
Hanna Halo2 Wireless pH Test for Soil with Built-in Electrode
HALO2 Wireless pH meter with Bluetooth® Smart Technology includes a dual-level LCD and temperature measurement for automatic temperature compensation. HALO2 pH probes can be used virtually anywhere as their versatility and ease of use will revolutionise the way pH is measured. Accurate and easy to use, HALO2 wireless pH Testers are ideal for measurements in samples that would be a challenge for standard design pH electrodes. The meters with their spe..
£256.19
Ex Tax:
Hanna Professional Waterproof Meter for Ultrapure Water HI-98197
The HI-98197 is a waterproof, portable EC (conductivity) meter that has an expanded conductivity range from 0.000 µS/cm to 400 mS/cm, as well as TDS (Total Dissolved Solids), resistivity, and three salinity scales. Conductivity & TDS Salinity Resistivity This meter offers a quick connect four-ring probe and allows the user to adjust the nominal cell constant, HI-98197 is also ready to perform all three stages of USP <645> method re..
£2,878.69
Ex Tax:
Hanna Advanced Portable Multiparameter for pH, EC/Turbidity, DO HI-9829-13042
Designed for measuring water quality, this advanced professional multi-parameter measures up to 15 parameters and comes with an impressive range of features. Dissolved Oxygen Turbidity pH EC Fully integrated GPS system 2 year manufacturers' warranty Designed for measuring water quality, this advanced professional multiparameter measures up to 15 parameters and comes with an impressive range of features. These include a fully integrated..
£8,936.19
Ex Tax:
Waterproof pH & Temperature Meter for Soil HI-99121
The HI-99121 portable pH meter, together with HI-12923 pH electrode, is designed to measure pH in soil or soil slurries. The HI-99121 is a lightweight, portable pH and temperature meter. It features a two button operation system and is simple to use. It has a waterproof and compact casing, large dual-line display, and automatic pH calibration at one or two points. Main features Simultaneous pH and temperature measurements on a large..
£933.69
Ex Tax:
Hanna HI-7609829/10 Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI 7698295
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 short protective shield and 10m cable. The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate conta..
£2,577.44
Ex Tax:
Hanna HI-769828-3 Spare EC Module for HI-769828 Probe
The HI-769828-3 is a 4-ring electrode conductivity (EC/TDS/Resistivity/ salinity) sensor for use with the HI-769828 probe. The HI-769828-3 is a conductivity sensor. This sensor is to be used with the HI-9828 and HI-98280 series of multi-parameter meters. The sensor body is made from durable polyvinyl chloride (PVC) material and contains AISI 316 stainless steel electrodes that are not subject to polarisation or surface coating effects. Each module is..
£749.94
Ex Tax:
Hanna HI-769828/10 Replacement DO/EC/Temperature Probe for HI-9828
The HI-769828/10 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 10m cable. ..
£3,091.19
Ex Tax:
Hanna HI-769828/20 Replacement DO/EC/°C Probe for HI-9828 with 20m Cable
The HI-769828/20 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 20m cable. Sensor replacement is quick and easy with field replaceable, screw type connectors that are colour-coded for easy sensor identification. The probe features a multi-strand-multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected agai..
£3,306.19
Ex Tax:
Hanna HI-769828/4 Spare DO/EC/T Probe for HI-9828 with 4m Cable
The HI-769828/4 is a spare dissolved oxygen, conductivity and temperature probe for the HI-9828 with a 4m cable. The probe features a multi-strand, multi-conductor shielded cable with 4m, 10m, and 20m lengths available. Its rugged, waterproof design makes it ideal for field use. IP68 - Dust-tight and protected against the effects of continuous immersion in water beyond 1m...
£2,802.44
Ex Tax:
Hanna HI-7629829/4 Logging Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI-7698295 SPS
The HI-7629829 is a multi-parameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected. Logging probe for pH/ISE/EC/DO/Turbidity/Temperature with HI-7698295 short protective shield and 4m cable. For use with the HI 9829 multiparameter. Sensor replacement is quick and easy with field replaceable, screw type connectors colou..
£5,736.19
Ex Tax:
Hanna HI-769828-1 Spare pH/ORP Module for HI-769828 Probe
The HI-769828-1 is a pH/ORP sensor, with o-ring. This sensor is to be used with HI-9828 and HI-98280 series multi-parameter meters. The electrode has a rugged PEI (polyetherimide) body that offers excellent chemical resistance in an unbreakable plastic, making it ideal for field and industrial applications. Each module is colour-coded for easy installation into the appropriate probe. IP68 - Dust-tight and protected against the effects of continuous i..
£749.94
Ex Tax:-228x228.jpg "Hanna HI-7609829/4 Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI 7698295 SPS")
Hanna HI-7609829/4 Probe for pH/pH+ORP/ISE, DO, EC, Temp with HI 7698295 SPS
Probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 Short Protective Shield and 4m cable. The use of Hanna’s microprocessor-based multiparameter intelligent probes with HI-9829 will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and manmade pollution to effectively evaluate applications for waste discharge permits, remediate contam..
£2,332.44
Ex Tax:-228x228.jpg "Hanna Logging probe for pH/pH+ORP/ISE, DO, EC, with Temp HI-7629829/10")
Hanna Logging probe for pH/pH+ORP/ISE, DO, EC, with Temp HI-7629829/10
Logging probe for pH/pH+ORP/ISE, DO, EC, temperature with HI-7698295 short protective shield and 10m cable. For use with the HI-9829 multi-parameter meter. The HI-7629829 is a multiparameter pH/ISE/EC/DO/Turbidity/Temperature autonomously logging probe for use with the HI-9829 portable meter. Sensors are automatically recognised by the probe and meter when connected. Sensor replacement is quick and easy with field replaceable, screw type connectors that..
£6,092.44
Ex Tax:
GAS Controller Replacement Probe – Standard Length for Pushfit - Pack 22
Please contact our technical department if you need help to determine which type of replacement probe you need...
£33.95
Ex Tax:GAS Controller Replacement Probe – Long Length for Pushfit
Please contact our technical department if you need help to determine which type of replacement probe you need...
£34.99
Ex Tax:
Coupling for AquaKing Submersible Pumps
A professional coupling and compression fitting to attach our range of AquaKing pumps with 16mm (1”) o.d supply tube or 25mm (1”) o.d supply tube...
£3.95
Ex Tax:
Float & Valve for HR-15 & HR-50 MK2
Replacement float valve for Foran HR15 and HR50 MK2 humidifiers...
£18.99
Ex Tax:
Analogue Humidistat HR-EHSA for HR-15 & HR-50
Analogue humidistat for the HR-15 and HR-50 humidifiers. Easy to use Manufactured to use with a single humidifier. Capacity of internal switch is 2.2 ampere High durability and trouble free Operation Set the dial to the humidity level you want. If you set the dial to 70, the humidifier would stop at 70%rH and restart at 67% rH. Installation Fix the unit at 150cm of height from the floor (There is a hole to fix on the reverse side of the case). S..
£104.95
Ex Tax:
1/2" Meshnet for Tom's Tumbler TTT3000
½" mesh to separate buds using Peeling machine TTT 3000 Tom's Tumbler (914795), since with this one comes a mesh with ½" slots, perfect for a good manicuring. It is very easy and quick to change, they are made with Velcro on the sides to attach them to the drum and then just close the zipper. These nets are made of resistant and anti-microbial materials, so you will be able to use them for many harvests. For good maintenance, you should keep them ..
£302.22
Ex Tax:1/4" Meshnet for Tom's Tumbler TTT3000
¼" meshnet to separate buds using Peeling machine TTT 3000 Tom's Tumbler (914795), as with this comes a meshnet with ½” slots, perfect for a good manicure. It is very easy and quick to change, they are made with velcro on the sides to adhere them to the drum and then just close the zip. These meshnets are made of resistant and anti-microbial materials, so you can use it for many harvests. For good maintenance, you should keep them clean and well l..
£302.22
Ex Tax:
1/2" Meshnet for Tom's Tumbler TTT1600
½” meshnet replacement for the TTT1600 Handcrank (59.69X73.66X66.04CM) (912958)" trimmer, perfect for a good manicure. To separate the buds you must use a mesh ¼" meshnet, like Peeler TTT 1600 (941185). Made with velcro on the sides to attach them to the drum and then close with a zip. A quick and easy system to change. These meshnets are made of resistant and anti-microbial materials, so that you can use them during many harvests. For good maintenance,..
£194.44
Ex Tax:
1/4" Meshnet for Tom's Tumbler TTT1600
A ¼" mesh to separate the flowers using Tom’s Tumbler™ TTT 2100 Dry Trimmer (913363), as this comes with a mesh with ½" slots, 1/2" Meshnet for TTT2100 Tom's Tumbler Trimmer (914802), perfect for a good manicure, of which you can buy a spare. It is very easy and quick to change, they are made with velcro on the sides to attach them to the drum and then just close the zip. These nets are made of resistant and anti-microbial materials, so you will be a..
£194.44
Ex Tax:1/2" Meshnet for Tom's Tumbler TTT2100
1/2" meshnet replacement for the Tom’s Tumbler™ TTT 2100 Dry Trimmer (913363) trimmer, perfect for good manicured. To separate the buds you must use a 1/4" meshnet, such as 1/4" mesh peeler TTT2100 (914801). Made of Velcro on the sides to attach them to the drum and then zip-closing. An easy and fast system to change. These meshnets are made of resistant and anti-microbe materials, so you can use them during many crops. For good maintenance, you must ke..
£216.67
Ex Tax:1/4" Meshnet for Tom's Tumbler TTT2100
A ¼" mesh to separate the flowers using Tom’s Tumbler™ TTT 2100 Dry Trimmer (913363), as this comes with a mesh with ½" slots, 1/2" Meshnet for TTT2100 Tom's Tumbler Trimmer (914802), perfect for a good manicure, of which you can buy a spare. It is very easy and quick to change, they are made with velcro on the sides to attach them to the drum and then just close the zip. These nets are made of resistant and anti-microbial materials, so you will be a..
£216.67
Ex Tax:
