Hypo Pure is a disinfectant concentrate based on hypochlorous acid (HOCL), which is used in professional hygiene management for disinfection of surfaces, equipment/tools, water/liquids and air.

Hypo Pure kills fast and reliably harmful bacteria, fungi, algae and viruses, e.g. Escherichia coli - Salmonella Typhimurium - Staphylococcus aureus - Pythium spp. / Phytophthora spp (root rot) - Botrytis cinerea (grey mould) - Peronosporale (downy mildew) - Erysiphaceae (powdery mildew).

Biofilms in water-bearing systems are also effectively removed, and the regeneration is prevented.

Disinfection of Air by Spraying or Fogging (e.g. in Rooms, Cars, Greenhouses Propagators)

Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).

For spraying, commercially available pressure sprayers are suitable.

Please note: Purified water should always be used for spraying and fogging applications (e.g. distilled water, deionised water or osmosis water). Complete wetting must be ensured! An ideal contribution is achieved by cold fogging - especially for room air disinfection.

Disinfection of Surfaces: (e.g. Walls, Equipment, Tools, Pots/Containers, Pipes or Tubes)

Prepare a 1:100 dilution (10 ml Hypo Pure 1L of water).

You can spray the mixture onto the surface or immerse parts with complex geometries. Pipes and tubes can easily be flushed.

Please note: If the surface is visibly dirty, it should be cleaned (mechanically) before being disinfected. Complete wetting of the surfaces must be ensured! The exposure time depends on the degree of contamination: 3-6 minutes.

Disinfection of Water (e.g. in Water reservoirs, Nutrient tanks or Air Conditioning

For preventive use, add 2-5 mL Hypo Pure to every 10 L of water directly to the water.

To treat an existing contamination, add 10-20 mL of Hypo Pure for every 10 L of water directly to the water.

Please note: At water temperatures below 23 ·c (74 °F), apply once a week with the lower dosage. At water temperatures above 23 ·c (74 °F), apply twice a week with the higher dosage.

We highly recommend preventive use! If you use organic fertilisers, enzymes, or microorganisms in hydroponic systems, you should observe a waiting period of 2 hours before using them after the water has been disinfected.

Disinfection of Inert Substrates

Prepare a 1:100 dilution (10 ml Hypo Pure per 1L of water).

Please note: Remove as many of the old roots as possible. Soak the substrate and let it rest for 24 hours. Suitable for all kinds of inert substrates.