GSE AC-EC LCD Fan Controller 2 x 5A by GSE
GSE AC-EC LCD Fan Controller 2 x 5A by GSE
-
£273.95
In Stock
This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal. 2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button.
Features:
- Temperature day
- Temperature hysteresis day
- Humidity day
- Humidity hysteresis day
- Minimum speed day
- Maximum speed day
- Temperature night
- Temperature hysteresis night
- Humidity night
- Humidity hysteresis night
- Minimum speed night
- Maximum speed night
- Negative pressure setting
- Switch sensor level
- Switch over time day/night
LCD display:
- Graphic and digital display of speed rpm constant
- Temperature display constant
- Humidity display constant
- Set point selectable not constant, over input keys
Sizes and technical data's:
- Case: WxHxD = 130x80x70mm
- Controller: WxHxD = 160x110x90mm
- Designed for: 2x1'000W
- Volts: 230V / 50HZ
- Current: 10A
- Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
- 0.5°C accuracy from –10°C to +85°C
- humidity accuracy ±4.5%rh
- Protection class: IP54
Settings range:
- Temperature: 15C° to 35C°, Hyst 1 to 5C°
- Humidity setting: 0-100%, Hyst 1 to 20%
- Minimum speed: off, 1% to 100%
- Maximum speed: 10% to 100%
- Negative pressure: 0% to -50%
Tags: GSE, AC-EC, LCD, Fan, Controller
Q & A
Be the first to ask a question.