Filter Products
Manufacturers
32
72
30
84
69
229
85
73
278
Wattage
80
81
115
88
116
206
Reflector Type
42
47
186
Dimmable
91
93
Fitting
55
58
Lamp Type
64
752
65
753
Ballast Type (V)
750
Product Categories

Gavita Pro 600 SE Classic 400V by Gavita

Gavita Pro 600 SE Classic 400V Grow Light Gavita
£299.99

The Pro 600 was the first Gavita fixture developed for residential voltages in the retail market. The year it was introduced it immediately received an European industry award. The compact complete fixture contains a lamp, HR96 reflector and horticultural quality ballast in one comprehensive package.

The real unique feature we introduced with this fixture was the use of a high voltage, high frequency lamp, while running on a standard consumer voltage. Of course the housing of the ballast is sealed and contains a gore-tex® plug to ventilate the housing, while keeping dust and humidity out. The higher output and added efficiency of the industry standard HR96 reflector make this the workhorse of the family.

The spread of the Pro 600 with the industry standard HR96 SE (Single Ended) reflector is about 2.7×4 ft (80×120 cm) at 2 ft distance in overlapping plans for light levels up to 1000 µmol s-1 m-2.
The fixed output, high frequency electronic ballast is designed to drive the Gavita Pro Plus 600 high voltage, high frequency single ended lamp, generating 1150 µmol s-1 of PAR light. This ballast is only suitable for our 400V, high frequency HPS lamps. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year.

Complete fixture

The integration of ballast and reflector results in a compact fixture. No external lamp wires results in low EMI, which makes it easier to comply with FCC regulations. All our fixtures are FCC compliant.

Balanced fixture

The fixture is balanced, so it can be mounted by just two hanging points. This enables much easier installation by brackets from C-profiles for example.

High frequency electronic ballast

There is no such thing as a universal ballast. You will get the optimal output when you match a lamp and ballast which are designed for each other. Our ballasts are designed to power our horticultural double ended lamps at exactly the right high frequency and power for optimal and stable output, and a long light maintenance. Our ballasts are only suitable for high frequency HPS lamps as specified in the product manual.

Soft start

Unlike magnetic ballasts our electronic ballasts never use more power than their specified power during the start-up sequence. Lamps reach their full power much quicker though than with a magnetic ballast.

Sealed housing with Gore-tex ventilation plug

Electronics are very sensitive to moist. Therefore our ballasts are completely sealed and equipped with a ventilation plug. When the ballast is switched on and heats up, the air inside the ballast expands and is vented out through the ventilation plug to protect the seals. When the ballast is switched off and the air inside the ballast cools down, the Gore-tex ventilation plug only lets in the air, and keeps out the dust and moisture, safeguarding your sensitive electronics.

Controllable output

With the output dial, you can select an output power, adjusting your light to changing circumstances or growth phases. Do remember though that every new lamp needs to burn in at 100% for at least 100 hours to stabilize before you dim or boost it. Failing to do so can lead to start-up problems when lower output power is selected and decreased output.
Horticultural design

Our fixture is not a contraption of a remote ballast and reflector: it is a fixture designed as a complete fixture. The high quality white coating is durable and UV resistant. All the terminals are sealed with gaskets and contact and terminals are high quality.

400V lamp technology for high frequency electronic ballast

The high voltage lamp technology results in a better efficiency of the arc tube: more light for the same power (10-25% more than traditional single ended lamps)! These lamps are best suited for extreme high frequency electronic ballasts, creating a stable arc without acoustic resonance, assuring optimal output and a long lamp life. The smaller arc tube and outer balloon require the lamp to be nitrogen filled instead of vacuum, which prohibits it to be air cooled. Air cooling of the lamp results in lower lamp temperature, which results in sub-optimal light output, up to 15% less than specified. Therefore these lamps are not suitable for direct air cooled fixtures.

Replaceable reflector

Our bracket is designed to be able to change you reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. We recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment.

No moving parts, optimal thermal management

Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.

Miro aluminum reflector

Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector of choice for horticultural growers world-wide, to provide uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Remember: the sun is never straight above plants, they do need light at an angle for optimal penetration.

Soft dim

When adjusting the output of your fixture the output power will very gradually change, protecting your lamp. It can take a minute per step, making this process so gradual that your eyes can hardly see it. Rest assured, they will dim.

FCC compliant

All our fixtures are FCC approved. No fake Chinese certificates: our FCC certificates are from a US lab and all our boxes include an official declaration of conformity with report number. Our retail fixtures are FCC class B compliant, our industrial fixtures minimal FCC class A. We check our production by sampling, and measure the EMI in our own test room for continuing compliance. FCC approval however does not mean that there is no EMI: it just confirms that they are within the legal limits.

Specifications

  • Input voltage: 220-240  
  • Input current at 100%: 2.9 Amps
  • Input power at 100%: 634 Wat
  • Lamp base: Gavita Pro 600 W Electronic HPS E40

Lamp included:

  • Gavita Pro 600 W Electronic HPS E40
 
Brand: Gavita
Product Code: Gavita Pro 600 SE Classic 400V Grow Light
Availability: In Stock


Price: £299.99
Qty:
Price Match (conditions apply)
×
* Name:
* Email:
Telephone:
* Competitor link
* Competitor price
Message
Make An Offer (products over £100 only)
×
* Name:
* Email:
Telephone:
* Product Gavita Pro 600 SE Classic 400V
* Your Offer Price
Message
WEEE Regulations

Product Q & A

Be the first to ask a question.

Product Tags
Your tags: Add tags
Separate tags with commas

         


View: Mobile - Full Site