Cuttings (Clones)

Stock plant (mother plant) should be sprayed or misted with Nitrozyme about two weeks before cuttings are to be taken. This will produce a flush of vigorous new shoot growth and provide plenty of material for cuttings. To each litre of lukewarm water add;

• 5ml Nitrozyme
• Few drops wetting agent

Mist stock plant thoroughly with this mixture. Apply when light levels are low, early morning is best time.

Treating RockWool

Take an appropriate amount of lukewarm water. Adjust pH to 5.5. For each litre add:

• 5ml Nitrozyme

Allow RockWool cubes to soak in this solution until thoroughly saturated. Set aside to drain. Take cuttings in the usual way. Once all cuttings are in place, mist them thoroughly; For misting solution, to each litre of lukewarm water add:

• 5ml Nitrozyme
• Few drops wetting agent

Soil Gardening

To each 10 litres of water add:

• 2-5ml Nitrozyme

Use this solution to water lawns and borders. Especially useful for pot plants.

Hydroponic Systems

To each 10 litres of Tank Volume add:

• 5ml Nitrozyme

Stir thoroughly before circulating to plants.

Foliar Feeding

For each litre add:

• 5ml Nitrozyme
• Few drops wetting agent

Shake mixture thoroughly and mist the entire plant. Foliar feeding should ALWAYS be carried out in low light; early morning or late evening.