Filter Products
Manufacturers
48
55
211
47
Fitting Size
183
Product Categories

Drip Irrigation

Search/Filter: Drip Irrigation
Page / Product Options
Display List Grid
Sort By:
Show:
Filter Products by Brand
Latest Products in Drip Irrigation
Micro Irrigation Tube Punch Micro Irrigation Tube Cutter Hydro Halo Dripper Ring 12" 3mm Dripper Line - 20M Roll 3mm Dripper Line - 200M Roll Dripper Set - 2 L/h 6 Way 2 L/h Black Dripper Arrow Spike Titan XL Kit Bag Titan S Kit Bag Titan M Kit Bag
Micro Irrigation Tube Cutter
The new Irrigation Tube Cutter is a handy accessory for the construction of hydroponic systems.The cutter has a square cutting action to perfectly prepare tubes for the installation of polytube fittings with a clean cut.
£7.99
Micro Irrigation Tube Punch
The new Irrigation Tube Punch is a handy accessory for the construction of hydroponic systems.The punch pierces a clean hole removing the wad and leaving the tube free of debris.
£7.99
Dripper Line
Standard black irrigation line suitable for making drip irrigation systems.
£6.39
Drip Feed Kit for HydroGarden Flood and Drain Kit (3' x 3') HydroGarden
Buy the low cost Table Drip Feed Kit as an extra and you can transform the Flood and Drain Table Kit into a Drip Feed version. Simply plumb in the fittings supplied. The Drip Feed Kit will give you the chance to experience another variation of hydroponics quickly and in an affordable and reliable way. This versatile and forgiving system is ideal for growing plants such as herbs and lettuce.
£19.99
Hydro Halo Dripper Ring 12" N/A
More effective irrigation of all types of pots/containers in all growing mediums. Drip emitters and stakes only provide a single point of irrigation making it hard for water/nutrient solution to evenly saturate a container. The water ring has 54 perfectly positioned pores to evenly irrigate containers eliminating dry pockets of growing medium. Kit contains 3 removable stakes to keep water rings in place around each plant. The water ring can also be used without the stakes if desired. The water ring has a 1 inch gap on one end to allow...
£9.60
360 Degree Dripper On Stake (0-33 L/h) N/A
High quality fitting made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions. Simply plug together to make the drip feed system to suit your needs.
£1.00
GHE Irrigation Kit for WaterFarm GHE
A spare Drip Ring and Pumping Column Kit for the GHE WaterFarm. It is a useful spare in case of damage or blockages.
£25.99
GHE Irrigation Kit for AquaFarm GHE
A spare Drip Ring and Pumping Column Kit for the GHE Aquafarm. It is a useful spare in case of damage or blockages.
£25.99
GHE Spare Grommet (suits WaterFarm/AquaFarm Reservoir) GHE
The GHE Spare Grommet is ideal for the WaterFarm or AquaFarm Reservoir.
£1.09
Watering Ring PLANT!T
The PLANT!T Watering Ring is ideal for use with DIY kits or systems. It comes with a laser-cut watering ring and a T-piece that 13mm (1/2") tubing can be attached to. The laser cutting process used on the watering ring eliminates swarf that creates very clean holes and reduces the likelihood of blockages.
£5.80
Flood Dripper N/A
Ensures a constant delivery as long as line pressure remains. For use with free-flowing media such as clay pebbles.
£0.22
Titan S Kit Bag PLANT!T
The titan S Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£23.00
Titan M Kit Bag PLANT!T
The titan M Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£23.00
Titan L Kit Bag PLANT!T
The titan L Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£34.40
Titan XL Kit Bag
The titan XL Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£48.00
Atlas SD Kit Bag PLANT!T
The atlas SD Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£34.00
Atlas S12 Kit Bag PLANT!T
The atlas S12 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£30.00
Atlas S18 Kit Bag PLANT!T
The atlas S18 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£30.00
Atlas MD Kit Bag PLANT!T
The atlas MD Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£34.00
Atlas M12 Kit Bag PLANT!T
The atlas M12 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£30.00
Atlas M18 Kit Bag PLANT!T
The atlas M18 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£30.00
Atlas L12 Kit Bag PLANT!T
The atlas L12 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£70.00
Atlas L18 Kit Bag PLANT!T
The atlas L18 Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£70.00
Atlas LD Kit Bag PLANT!T
The atlas LD Kit Bag contains all the fittings, pipe work and drippers that are required for this system. You will also receive a pump and instructions too.
£80.00
Octa-Mitter Adjustable Dripper N/A
Available with or without a stake. The Octa-mitter is an adjustable dripper giving 0-40 litres per hour.
£1.12
Dripper Line Connector N/A
High quality fitting made to suit harsh Australian conditions and are therefore of a very high quality and will last indefinitely in European conditions.
£1.50
Button Dripper Assembly N/A
These pre-assembled Woodpecker Button Dripper sets come complete with: * Dripper * 80cm PVC lead & stake * Either 2ltr/hr or 4ltr/hr; pressure compensating or non-compensating discharge unitNon-compensating units Flow rates (i.e. 2 l/h & 4l/h) calibrated at 1 bar (15psi) pressure. If pressure increases output increases. If pressure is lower than 1 bar, flow rate will be less . As water pressure can change from one end of a drip system to the other (& therefore flow rates), unregulated drippers are not recommended for fertigation...
£1.00
Mini Punch N/A
Basic Mini Punch handtool for producing a 3mm hole in LDPE pipe.Manufactured from high strength moulded plastic.
£6.00
Assembling Tool for Drip Sprinkler Systems N/A
What used to be a difficult & exhausting operation now becomes easy, simple & comfortable. This handy tool is a must for anyone who tailor-makes and assembles their own drip sprinkler systems. Simply place the tip of the connector / dripper into the piping and fit into the tool. By operating the handle of the tool the connector component is pushed firmly into the piping. Manufactured from high strength moulded plastic.
£21.00
Hole Punch N/A
Comfortable grip handle Comes with specially designed adaptor for inserting sprinklers & drippers Manufactured from high strength moulded plastic
£10.00
Scissor Punch N/A
This high strength plastic tool is shaped for maximum comfort and ease of operation. The blade is heat-treated and ground for long0life & accuracy of cut, and retracts fully after use, thereby protecting it. There are two models, one for 16mm & 20mm LDPE pipe, and one for 25mm & 32mm pipe.
£14.00
5mm Barbed Tee N/A
For connecting 5mm microtube to the LDPE supply pipe.
£0.50
5mm Insert Nipple N/A
5mm insert nipple for connecting microtube to LDPE supply pipe.
£0.20
5mm Tee N/A
Thread x Barb x ThreadFor connecting two 5mm PVC tubes to a LDPE supply pipe.
£0.50
Adustable On-Line Dripper N/A
Adjustable dripper from 0-40ltr/hr. Just unscrew the cap one click at a time to increase the flow - drip, dribble or squirt.These drippers can be plugged directly into the LDPE supply pipe, or fixed to the end of 5mm PVC tube.
£1.00
Dripper Cap N/A
Dripper caps are used to shut off individual drippers as & when required.Dripper must have a nipple outlet.
£0.20
Inline Dripper N/A
This dripper has been designed to fit 'inline' rather than on the end of a lead. The water is discharged from the side of the dripper, not out of the end.This is ideal for watering hanging baskets or tubs where one dripper isn't enough.Several drippers can be placed along a line (i.e. troughs) or in a loop (i.e. larger baskets & tubs), allowing the water to be applied at several points, giving more even watering.- 2ltr/hr discharge rate (unregulated)
£0.50
2 L/h Black Dripper Arrow Spike N/A
Dripper - Arrow - spike - 2 L/H (Black) DR105
£0.31
CNL Dripper N/A
Non-leaking dripper which delivers 8 litres per hour.
£0.87
Junior PC Drippers N/A
Drippers available in to sizes - 2 litres per hour and 4 litres per hour.
£0.58
Adjustable Spike Mounted Dripper N/A
Shrubbler - Spike Mounted Dripper, fully adjustable from 0-40 ltr/hr. Just unscrew the cap one click at a time to produce a drip, dribble or squirt.For use with 5mm PVC microtube.Comes with a 5mm insert nipple for connecting PVC tube to LDPE supply pipe.  
£1.00
Spray Stake N/A
This spray stake sprays 130o oval pattern in a sharp 'fan'.This distributes water over a larger area than a dripper making it an attractive alternative for watering planters & baskets etcFlow rate: 18 ltr/hrCan only be used with 3/5mm tube (listed below)
£0.50
Button Dripper N/A
Button Dripper features a barbed inlet for connecting into LDPE supply pipe, and nipple outlet to accommodate dripper cap.This compact dripper is designed for economic 'dripper for each plant' irrigation.- 2 or 4ltr/hr output - Available as pressure-compensating or non-compensating
£0.50
Pot Dripper N/A
This Woodpecker Pot Dripper has a threaded inlet for connecting into 5mm PVC tube, and nipple outlet to accommodate dripper cap.This compact dripper is designed for economic 'dripper for each plant' irrigation.- 2 or 4ltr/hr - only available as non-pressure compensating
£0.50

View: Mobile - Full Site