The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The SPEED-B1 is designed to control a variable speed centrifugal fan up to 6-amps. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control the temperature within an area using a variable speed fan.
The user selects the temperature they would their area to be. At that temperature or above, the fan will be operated at full power to provide maximum cooling. Once the temperature drops 3°F b..
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The built in photocell also ..
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained.
A built-in photocell automatically activates the unit only during..
Finally available in the UK, A safe and reliable CO2 generator, featuring Electronic ignition, eliminating the need for wasteful and potentially problematic open pilot lights. Available in 3 different size's for small, medium and larger applications. Perfect for sealed rooms, each unit consists of several innovative and useful safety features, for both personal safety as well as efficient operation and maintaining the safety and performance of your plants...
(European version: requires plug adapter)
The D1-PPM Carbon Dioxide controller provides high-end performance, at economy pricing.
Starts by using a highly accurate NDIR CO2 sensor. The CO2 Sensor is located in a remote sensor enclosure that can be positioned up to 5 meters from the main controller.
Included inside the remote sensor enclosure is also a photocell which will detect light levels to activate the CO2 control function ONLY when desired by the ..
The SUPERPRO CRL-1 Combination Recycling and Lighting Timer offers horticulturists some of the most essential safety features available to control supplemental lighting and hydroponic pumps.
SUPERPRO CRL-1 Features
1. Features a 24-hour digital clock capable of turning lighting ON and OFF at the user's specified times.
2. When using supplemental HID or CFL or LED lighting, it is vital to ensure the grow lights do not raise growing temperatures beyond a ..
The Superpro MFRT-1 offers (2) individual recycling timers that each have an On and Off setting for a total of (4) timers. The unit has 4 receptacles. Each receptacle is associated with one of the (4) timer settings on the unit. Each of the recycling timers (Timer #1 & #2) can be specified to operate during the Day, Night or 24-hours a day. When operating, one of the (2) available outputs (receptacles) will be powered as the timer counts down. This pro..
Digital CO2 Controller
The CARBON-D1 Deluxe Digital CO2 Controller features a precision NDIR carbon dioxide (CO2) sensor that measures the level of CO2 up to 2500 PPM. The CARBON-D1 can be used to control supplemental CO2 in greenhouses, or vent excessive CO2 from mushroom arms or closed indoor spaces. A resettable circuit breaker and heavy-duty internal construction ensures the unit will operate for years without fail. The CARBON-D1 contains only high-qu..
D1-TMP/Digital Temperature Controller
The D1-TMP Digital Day/Night temperature controller is a very accurate device that allows the user to control EITHER a cooling or heating device.
A two meter long water-proof remote temperature sensor can be placed where it can sense the water or air temperature that the D1-TMP will be controlling.
The user first selects whether they are controlling a cooling or a heating device.
Feature with Day and Night temper..
D1-HUM/Digital Humidity Controller
The D1-HUM Digital Day/Night humidity controller is a very accurate device that allows the user to control EITHER a humidifying or dehumidifying device.
A two meter long remote humidity sensor can be placed where it can sense the moisture level (rH) that the D1-HUM will be controlling.
The user first selects whether they are controlling a humidifying or dehumidifying device.
Feature with Day and Night humidity setti..
D1-LIT/Digital Lighting Controller
The D1-LIT provides all the control for your supplemental lighting ballast. The D1-LIT is a MUST HAVE for any serious grower using supplemental lighting.
It features an accurate 24-hour digital timeclock. The user selects the time that the lights will be turn ON and OFF.
Measure the temperature inside the growing area and to shut off the lights if the temperature exceeds a safe level.
User can select the Maximum Tem..
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..
Was £106 - Now £90
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The buil..
Was £106 - Now £90
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accu..
The modular hydroponic system from Superpro has been designed to be the easiest and most flexible system available for serious growers. Featuring a state of the art DIGITAL controller that monitors the flood and drain (ebb & flow) sensors, and automatically waters your plants based on the times you set. Simply set the flood and the drain time and the controller takes care of the rest. Foodgrade materials are used in all components, high-flowing 20 mm t..
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
The SPEED-B1 is designed to control a variable speed centrifugal fan up to 6-amps. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control the temperature within an area using a variable speed fan.
The user selects the temperature they would their area to be. At that temperature or above, the fan will be operated at full power to provide maximum cooling. Once the temperature drops 3°F b..
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The built in photocell also ..
The VAPOR-B1 is a humidity controller that can control either a dehumidifier or humidifier. Once the VAPOR-B1 is connected to a power source, and the humidification device is connected to the VAPOR-B1 power outlet, the device connected will be automatically controlled by the settings on the VAPOR-B1.
The user can choose to have different Day and Night humidity settings which will be automatically switched to the correct mode by the built-in photocell. The..
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable me..
The CARBON -B1 is designed to cost-effectively control the CO2 level inside a growing area. An extremely accurate NDIR CO2 PPM sensor (part-per-million meter) is combined with a digital microprocessor to create an accurate and simple method to control supplemental CO2 use in a greenhouse. The unit can control CO2 levels up to 2500PPM. The user selects the desired CO2 level to be maintained.
A built-in photocell automatically activates the unit only during..
Finally available in the UK, A safe and reliable CO2 generator, featuring Electronic ignition, eliminating the need for wasteful and potentially problematic open pilot lights. Available in 3 different size's for small, medium and larger applications. Perfect for sealed rooms, each unit consists of several innovative and useful safety features, for both personal safety as well as efficient operation and maintaining the safety and performance of your plants...
(European version: requires plug adapter)
The D1-PPM Carbon Dioxide controller provides high-end performance, at economy pricing.
Starts by using a highly accurate NDIR CO2 sensor. The CO2 Sensor is located in a remote sensor enclosure that can be positioned up to 5 meters from the main controller.
Included inside the remote sensor enclosure is also a photocell which will detect light levels to activate the CO2 control function ONLY when desired by the ..
The SUPERPRO CRL-1 Combination Recycling and Lighting Timer offers horticulturists some of the most essential safety features available to control supplemental lighting and hydroponic pumps.
SUPERPRO CRL-1 Features
1. Features a 24-hour digital clock capable of turning lighting ON and OFF at the user's specified times.
2. When using supplemental HID or CFL or LED lighting, it is vital to ensure the grow lights do not raise growing temperatures beyond a ..
The Superpro MFRT-1 offers (2) individual recycling timers that each have an On and Off setting for a total of (4) timers. The unit has 4 receptacles. Each receptacle is associated with one of the (4) timer settings on the unit. Each of the recycling timers (Timer #1 & #2) can be specified to operate during the Day, Night or 24-hours a day. When operating, one of the (2) available outputs (receptacles) will be powered as the timer counts down. This pro..
Digital CO2 Controller
The CARBON-D1 Deluxe Digital CO2 Controller features a precision NDIR carbon dioxide (CO2) sensor that measures the level of CO2 up to 2500 PPM. The CARBON-D1 can be used to control supplemental CO2 in greenhouses, or vent excessive CO2 from mushroom arms or closed indoor spaces. A resettable circuit breaker and heavy-duty internal construction ensures the unit will operate for years without fail. The CARBON-D1 contains only high-qu..
D1-TMP/Digital Temperature Controller
The D1-TMP Digital Day/Night temperature controller is a very accurate device that allows the user to control EITHER a cooling or heating device.
A two meter long water-proof remote temperature sensor can be placed where it can sense the water or air temperature that the D1-TMP will be controlling.
The user first selects whether they are controlling a cooling or a heating device.
Feature with Day and Night temper..
D1-HUM/Digital Humidity Controller
The D1-HUM Digital Day/Night humidity controller is a very accurate device that allows the user to control EITHER a humidifying or dehumidifying device.
A two meter long remote humidity sensor can be placed where it can sense the moisture level (rH) that the D1-HUM will be controlling.
The user first selects whether they are controlling a humidifying or dehumidifying device.
Feature with Day and Night humidity setti..
D1-LIT/Digital Lighting Controller
The D1-LIT provides all the control for your supplemental lighting ballast. The D1-LIT is a MUST HAVE for any serious grower using supplemental lighting.
It features an accurate 24-hour digital timeclock. The user selects the time that the lights will be turn ON and OFF.
Measure the temperature inside the growing area and to shut off the lights if the temperature exceeds a safe level.
User can select the Maximum Tem..
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..
Was £106 - Now £90
The CHRONO-B1 recycling timer is designed to turn ON and OFF any device on a repeating time schedule.The schedule / settings are determined by the user. The user simply plugs the CHRONO-B1 into a standard power outlet, and then plugs the device they want to control into the receptacle on the front of the CHRONO-B1.
The user then can select the ON time (from 15 seconds to 5 hours) and the OFF time (from 15 seconds to 13 hours). The buil..
Was £106 - Now £90
The THERM -B1 temperature controller is designed to activate a cooling or heating device. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 7 to 35’C.
Activate a cooling heating device up to 15 amps
Separate Day and Night temperature settings
A digital microprocessor and solid state temperature sensor are combined to create an accu..
The modular hydroponic system from Superpro has been designed to be the easiest and most flexible system available for serious growers. Featuring a state of the art DIGITAL controller that monitors the flood and drain (ebb & flow) sensors, and automatically waters your plants based on the times you set. Simply set the flood and the drain time and the controller takes care of the rest. Foodgrade materials are used in all components, high-flowing 20 mm t..