The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
The latest addition to GAS’ range of controllers, the new AC 1 is the easy and effective way to control AC fans.
The controller has two modes to ensure you can maintain a perfect environment. Either set fan speed manually, or control thermostatically.
Mode 1 - when the temperature probe is connected, the controller will thermostatically control your grow room environment
Mode 2 - when the temperature probe is disconnected, the controller will run at m..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
Adjustable temperature fan controller with underpressure control. Let Rhino do the work! The RC-1 enables growers to acurately control the air exchange, set desired temperature and maintain negative pressure in the grow room.
Intake and extraction fans will run at maximum speed to quickly establish desired temperature, once reached the fans will drop to a minimum idle speed ensuring the room is adequately ventilated and preventing air leaks.
How to use:..
The GAS EC1 thermostatic speed controller is the perfect way to control your outtake EC fans. With a minimum and maximum speed control and powered from the fan, there is no need for a power pack.
Temperature control your fan
Set maximum fan speed to reduce running costs and reduce noise
Set minimum fan speed.
Keep air fresh and CO2 rich
Plugs directly onto Systemair’s EC fan range
Please note: Must be used with Active Cables. Comes with 1 x ..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECREASE humidity indepen..
The Superpro DDAC-1 receives information from the sensors and activates external fans, air conditioners, dehumidifiers, heaters, and CO2 equipment as needed to maintain optimum levels for indoor agriculture. Until now, this simple idea was easier said than done.
A 15-amp / 120 or 10-amp / 240 vot circuit breaker and heavy-duty internal construction ensures that the unit will operate for years without fail. We only use high-quality UL / CE listed component..
Was £350 - Now £300
The Superpro AC-1 is a simple solution to controlling temperature, humidity and CO2 inside the growing area, giving you a perfect balance between cost and accuracy.
AC-1 contains a built-in photocell that can activate a CO2 device during the day and is coordinated with the exhaust fans so as CO2 stops emitting when fans come on.
Note: CO2 levels must be measured and regulated by user.
Modes
Mode A: LOWER temperature and DECR..
The latest addition to GAS’ range of controllers, the new AC 1 is the easy and effective way to control AC fans.
The controller has two modes to ensure you can maintain a perfect environment. Either set fan speed manually, or control thermostatically.
Mode 1 - when the temperature probe is connected, the controller will thermostatically control your grow room environment
Mode 2 - when the temperature probe is disconnected, the controller will run at m..
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a standard daytime recycling t..
Adjustable temperature fan controller with underpressure control. Let Rhino do the work! The RC-1 enables growers to acurately control the air exchange, set desired temperature and maintain negative pressure in the grow room.
Intake and extraction fans will run at maximum speed to quickly establish desired temperature, once reached the fans will drop to a minimum idle speed ensuring the room is adequately ventilated and preventing air leaks.
How to use:..
The GAS EC1 thermostatic speed controller is the perfect way to control your outtake EC fans. With a minimum and maximum speed control and powered from the fan, there is no need for a power pack.
Temperature control your fan
Set maximum fan speed to reduce running costs and reduce noise
Set minimum fan speed.
Keep air fresh and CO2 rich
Plugs directly onto Systemair’s EC fan range
Please note: Must be used with Active Cables. Comes with 1 x ..
Was £449.95 - Now £380
The Superpro AC-2 controls temperature, humidity and CO2 by using precision sensors that monitor air temperature, humidity and light as well as timing CO2 generation. AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture.
Adaptable
If the CO2 output is not being used as a CO2 timer, this can be used as a stan..