Product Categories

Milwaukee

Milwaukee
Page / Product Options
Display List Grid
Sort By:
Show:
Digital Brix Refractometer MA871 Milwaukee
The MA871 is an optical instrument that employs the measurement of refractive index to determine the % Brix of sugar in aqueous solutions. The method is both simple and quick. Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit). Within seconds the instrument measures the refractive index of the sample and converts it to % Brix concentration units. The MA871 digital refractometer eliminates the uncertainity associated with mechanical refractometers and is easily portable for measurements in the field. The measurement technique and temperature compensation em..
£189.99
ORP57 Pocket-size ORP / Temperature Meter with replaceable electrode Milwaukee
IP65 Waterproof pH tester with Large dual-level LCD that displays ORP and temperature (°C or °F). The large display shows readings from -1000 to +1000 (with a resolution of 1 mV) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. ORP57 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Complete with a temperature probe for faster and more precise temperature measurement it compensates automatically for temperature. Auto power OFF saves battery power after non-use. The double..
£286.00
Mi605 Dissolved Oxygen and Temperature Professional Portable Meter Milwaukee
Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input. Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button. No need for chemical solutions! A HOLD ..
£1,998.99
MC510 ORP Controller Milwaukee
The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. These MC Controllers are ideal for ozone dosing. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional ORP controller User selectable Hi/Low Set Point Visual LED alarm Supplied with 12 VDC adapter 1 power plug for O3 dosing Platinum ORP electrode (BNC connector) ..
£560.99
MW600 Standard Portable Dissolved Oxygen Meter Milwaukee
The MW600 is a Portable Dissolved Oxygen meter ideal for use in school laboratories. Dissolved Oxygen measurements are also very important in fish farms and ponds, where Oxygen levels are continuously monitored to obtain optimal reproduction. The MW600 calibrates easily in 2 points (at 100% saturated air and in 0 Oxygen solution) and has Automatic Temperature Compensation which guarantees the highest accuracy. The low battery warning, easy to replace screw on cap membranes make this meter very simple to operate. Rugged Carrying Case (Optional) provides handy on-site meter calibration and measurements. MW600 is supplied complet..
£677.99
Mi805 pH / Conductivity / TDS / Temperature Professional Portable Meter Milwaukee
Measures 4 parameters with 1 single probe. Mi805 offers you a combination of pH, Conductivity, total dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ß) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically free..
£1,078.00
MW801 Standard Portable pH / Conductivity / TDS Combination Meter Milwaukee
3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements. Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS. ..
£592.00
pH58 pocket-size pH, ORP & Temperature Meter Milwaukee
Combination waterproof testers with advanced functions also include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD. It shows readings in an extended range from -2.00 to 16.00 pH or ±1000 mV and simultaneously shows temperature from -5.0 to 105.0°C or 23 to 221°F. The pH58 has a stability indicator and hold feature that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Calibration is performed automatically at 1 or 2 points using standard or NIST buffers.The modular..
£396.00
MP810 Dosing Pump Milwaukee
Peristaltic dosing pump, constant dosing flow of 1.5L/h (25mL/min); no regulation; 2 bar maximum pressure. Made of polipropilene. Power supply: 240 VAC ± 10%. Supplied with accessories (tubes, filter, injection fitting) in a carton box.       Range 0.0 - 14.0 pH Resolution 0.1 pH Accuracy ±0.2 pH Set point pH 5.5 to 9.5 pH Alarm active when reading is higher or lower than set point Output power socket relay, 230V / 117V; 8A Output active when measurement is higher or lower than selected set point..
£91.99
MP815 Dosing Pump with Adjustable Dosing Flow Milwaukee
Peristaltic dosing pump with adjustable dosing flow of 0.0 - 2.2 L/h (0.0 - 37 mL/min); 2 bar maximum pressure. Made of polipropilene. Power supply: 240 VAC ± 10%. Supplied with accessories (tubes, filter, injection fitting) in a carton box. ..
£111.99
pH56 Pocket-size pH / Temperature Meter with replaceable electrode Milwaukee
IP65 Waterproof pH tester with Large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from -2.00 to 16.00 pH (with a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. pH56 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Complete with a temperature probe for faster and more precise temperature measurement it compensates automatically for temperature. Calibration is made automatically i..
£215.00
Mi160 pH / ORP / ISE / Temperature Laboratory Bench Meter Milwaukee
This new pH/ORP/ISE/Temp bench meter is ideal for very accurate and precise measurements for all laboratory needs. It can perform ion-selective measurements directly in ppm, as well as pH, ORP and temperature measurements. pH calibration can also be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide differences in pH can be found. Thanks to the memory it can store up to 50 data sets for each range that can be downloaded to a PC via RS232 or USB. These instruments also have GLP features so, at any time, the user can reca..
£2,098.00
MC125 pH / ORP Controller  Milwaukee
With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels. The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional pH/ORP controller User selectable Hi/Low Set Point Manual 2 points calibration Visual LED alarm Supplied with 12 VDC adapter and..
£802.99
ph and Conductivity Kit MW710 Milwaukee
MW710 Kit includes: MW100 (pH meter, range: 0.0 to 14.0, with 2 point manual calibration, ±0.2 pH accuracy. Supplied with SE220 double junction pH electrode, 9V battery, 20 mL. pH 7.01 sachet buffer solution and screwdriver for calibration. ) and MW302 (Conductivity meter – range: 0.0 – 10.0 mS/cm with automatic temperature compensation and 1 point manual calibration. Supplied with SE520 conductivity probe, a 9V battery, a 20 mL 1,413 µS/cm sachet buffer solution and screwdriver for calibration.) in hard carrying case. ..
£284.99
pH Controller and Doser MC720 Milwaukee
Control the pH of your tank/reservoir AUTOMATICALLY! The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems. It has been specifically designed to control the pH in mixing tanks for fertilization. The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank. After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level. ..
£259.99
Lux Meter MW700 Milwaukee
The MW700 is a portable Lux meter designed to perform light measurements. The MW700 is supplied with a light sensor connected to the meter that measures from 0 to 50000 Lux. Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux is a unit that indicates the density of light that falls on a surface.     Range 0.000 to 1999 Lux 2000 to 19999 Lux 20000 to 50000 Lux Range Setting manual through key buttons Resolution 1 Lux 10 Lux 100 Lux Accuracy ±6% of reading ±1 digit Peak W..
£138.00
Conductivity Economical Pocket Tester CD611 Milwaukee
Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically. The CD611 is a Conductivity tester specifically designed for water analysis. The calibration procedure is very simple and fast. This tester has automatic temperature compensation, 100 µS/cm resolution and a range of 0 to 20000 µS/cm. CD611 is supplied complete with protective cap, calibration screwdriver, ..
£45.99
Portable EC Meter MW302 Milwaukee
Entry level EC meter, with large easy read digital display. Complete with automatic temperature adjustment and 9V battery. ..
£113.99
MC122 pH Controller Milwaukee
The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) User selectable Hi/Low Set Point Manual 2 points calibration Visual LED alarm Supplied with 12 VDC adapter and mounting kit Power plug for CO2 dosing Double junction pH electrode with 2m cable (BNC connector) ..
£430.99
Smart Continuous Conductivity Monitor MC310 Milwaukee
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. Professional EC - Conductivity Monitor User selectable Hi/Low Set Point Manual 1 point calibration Visual LED alarm Supplied with 12 VDC adapter, mounti..
£140.00
MW102 Standard Portable pH / Temperature Meter Milwaukee
Standard portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW102 is a microprocessor based pH/Temperature meter with extended range (-2.00 to 16.00 pH), Automatic Temperature Compensation, automatic calibration in 2 points and ±0.02 pH accuracy. The meter is supplied with pH electrode and calibration solutions. ..
£425.99
Waterproof EC60 Pen Milwaukee
Easy to use entry level EC pen. Reads both EC and temperature. The 'easy read' large display and reading hold button make this a great product for beginners. Complete with battery. ..
£58.99
Mi306 Conductivity / TDS / NaCl / Temperature Professional Portable Meter Milwaukee
Mi306 is a waterproof portable logging microprocessorbased Conductivity / TDS / NaCl / Temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached. The measurements are automatically (ATC) or manually (MTC) compensated for temperature. The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conductivity (NoTC). The Battery Error Preventing System (BEPS) switches the mete..
£1,188.00
Waterproof pH55 Pen Milwaukee
Easy to use entry level pH pen. Reads both pH & temperature. The 'easy read' large display and reading hold button make this a great product for beginners. Complete with battery. ..
£58.99
pH Tester with 1 Point Calibration pH600 Milwaukee
pH600 pH Economical Pocket Tester Milwaukee's economical testers are easy-to-use and low cost instruments to measure quick and reliable pH, EC or TDS values. Measuring electrical conductivity is the best way of checking the amount of salt or dissolved solids (TDS) in water. Milwaukee provides you with a range of pocket testers that will allow you to measure from very low to very high conductivity solutions. All EC/TDS testers compensate for the temperature variance automatically. The pH600 is a pH tester specifically designed for the aquarium market. The calibration procedure is very simple and fast. This tester has 1 point..
£45.99
Portable pH Meter MW100 Milwaukee
Entry level pH meter, with large easy read digital display. Complete with manual temperature adjustment and 9V battery. ..
£113.99
Smart Continuous pH Monitor MC110 Milwaukee
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution. User selectable Hi/Low Set Point Manual 2 points calibration Visual LED alarm Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration sol..
£140.00
MW802 pH & Conductivity Combination Meter Milwaukee
3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. Supplied with the SE600 interchangeable probe..
£259.00
pH / Conductivity / Temperature Professional Portable Meter MI806 Milwaukee
Mi806 pH / Conductivity / TDS / Temperature Professional Portable Meter Measures 4 parameters with 1 single probe. Mi806 offers you a combination of pH, Conductivity, total dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ß) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the ..
£478.00
pH Meter for Soil MW101-Soil Milwaukee
Entry level, inexpensive pH/ORP/Temperature Portable Meter for fast and reliable results. This handy and ergonomically designed portable meter is ideal for anyone working on a low budget and still requires fast and reliable measurements. This portable meter is suitable for a wide range of applications, such as Educational, Agriculture and Horticulture, as well as water and environmental analysis. This easier and faster to calibrate portable meter have a smaller, ergonomic and lighter case design. Other features include 100% larger and easier to read LED Display and long battery life. Meter is supplied with pH or ORP elec..
£223.99

View: Mobile - Full Site